Just Toys 1992 Crossbow.
#1
Posted 11 November 2009 - 07:33 PM
And, what a gun.
(Sorry about the huge pics)
I've replaced the plunger rod ,So plusbow springs fit, but I've only got a [k25] in it. Other than that, I've only couplered it, and improve the seal and lube it. despite these seemingly simple mods, I'll bet i'm hitting about 110 feet flat.
And, it's only 30 bucks off amazon.
Anyone gonna try catch one of these things now?
Also, its tiny. as you can clearly tell by this picture of me holding it:
This is the NerfHaven profile of Northeast Designs. For more info visit https://www.facebook...p8OwIso&fref=nf
Old school Nerf engineer since 2008
#2
Posted 11 November 2009 - 07:38 PM
Edited by Fredo, 11 November 2009 - 07:38 PM.
22:25 Mr_BadWrench whats your name? john holmes?
#3
Posted 11 November 2009 - 07:41 PM
even though its small, i'd rate it a 7.Thats just awesome. How would you rate it on comfort level?
This is the NerfHaven profile of Northeast Designs. For more info visit https://www.facebook...p8OwIso&fref=nf
Old school Nerf engineer since 2008
#4
Posted 11 November 2009 - 08:04 PM
Great job.
Really clean mod and it looks great.
VengefulWaffle BOY, 12 KILLED IN MOUNTAIN PASS BY WILD RACCON, EXPERTS SAY HE ATTEMPTED TO HOLD IT OFF WITH NERF NITEFINDERS
POLICE SAY: ALCOHOL MAY HAVE BEEN INVOLVED
Guess who he was talking about...
#5
Posted 11 November 2009 - 08:16 PM
How strong do you think the gun is overall?
Does it need reinforcing?
Good job
[18:17] <+Nerfer> pls dont call me that
[18:18] * Nerfer is now known as Guest17574
[18:18] <+Lucian151> Woah its Beefy Theify
[18:19] <+Guest17574> STOP CALLING ME THAT IM NOT FAT
[18:19] <+Guest17574> pls
#6
Posted 11 November 2009 - 08:32 PM
This is the NerfHaven profile of Northeast Designs. For more info visit https://www.facebook...p8OwIso&fref=nf
Old school Nerf engineer since 2008
#7
Posted 11 November 2009 - 09:00 PM
#8
Posted 12 November 2009 - 01:51 AM
Edited by Cannonball, 12 November 2009 - 01:52 AM.
#9
Posted 12 November 2009 - 02:01 AM
From oodalumps original thread...
I think it looks like it's very awkward to prime. Especially if you're replacing the spring. It would be a lot of work to flip the plunger, while making it look clean, while making it comfortable to use, all at the same time.You should try to flip the plunger tube around in there so you cock it from the back and then relocate the barrel so it's right in front of the plunger tube. You'd get better ranges that way but it would be a pain and I don't know if you could do it and keep the catch mech in the same place.
But I don't think these are incredibly common, so I wouldn't want to go hacking up a perfectly fine blaster. And especially one that is older than a lot of the members on this site.
It looks like it works awesome with the Firefly turret. Props on that. Turrets are awesome on anything.
Edited by Ryan201821, 12 November 2009 - 02:02 AM.
#10
Posted 12 November 2009 - 07:35 AM
#11
Posted 12 November 2009 - 08:04 AM
I was actually looking on amazon myself and I found one. I did not get it because I thought it looked crappy. I gues I am wrong.
Thank god you said that; we never would have known that you didn't buy one!!
#12
Posted 12 November 2009 - 01:15 PM
I think it looks like it's very awkward to prime. Especially if you're replacing the spring. It would be a lot of work to flip the plunger, while making it look clean, while making it comfortable to use, all at the same time.
Reminds me of a SNAP-4. Those aren't uncomfortable at all. In fact, you could probably put a housing on this so it primes the same way.
Kruger and Dunning (1999)
#13
Posted 12 November 2009 - 06:40 PM
This is sick, but I would replace the handle with a LSFG one. Looks mighty small.
It's just screaming to be rearloading...
I seen a movie about that once.
#14
Posted 12 November 2009 - 07:57 PM
#15
Posted 12 November 2009 - 08:24 PM
In any case, good job with the mod.
#16
Posted 12 November 2009 - 08:25 PM
How is this gun so impressive? It's a springer that gets around 100 feet, is awkward to prime and is tiny. Are people just raving over this because it has the word crossbow in it? I mean, there are a lot of springer that get 100+ and are less expensive and less awkward.
I personally like it because...
a. It's easy to mod.
b. There are no complicated mods and it still gets great range.
c. It's new.
So it's not neccesarily the best gun, and we don't like it because it has crossbow in the name we like it because
of ab&c.
I really like it's new turret, good job on that.
VengefulWaffle BOY, 12 KILLED IN MOUNTAIN PASS BY WILD RACCON, EXPERTS SAY HE ATTEMPTED TO HOLD IT OFF WITH NERF NITEFINDERS
POLICE SAY: ALCOHOL MAY HAVE BEEN INVOLVED
Guess who he was talking about...
#17
Posted 21 November 2009 - 02:09 PM
The priming mechanism is similar to a SNAP, where the plunger head acts as a catch point.
Also, this blaster should more appropriately be referred to as the "Super Shots Crossbow".
#18
Posted 21 November 2009 - 03:15 PM
But this is amazing. The internals are extrmely simple. Do you think it would be possiable to flip around the pt?
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users