I have an RSCB clip on my BBB, and I'm sick of the copper always moving it down. Has anyone in the NIC made a stabilizer for the RSCB clip? E-tape looks way to messy! I was thinking about gluing the clip to my BBB, but that would put me at a disadvantage, if I wanted to take it off. If anyone has made a stabilizer please post here.
6 replies to this topic
#1
Posted 24 October 2009 - 09:26 AM
It's Nerf or Nothin'!
#2
Posted 24 October 2009 - 09:37 AM
I cut a small notch the diameter of my PVC at the top lip of the BBB. My RSCB nestles in right there and towards the back I've zip-tied it down. Its easily removable and helps to prevent my RSCB from slipping off.
"He who can modify his tactics in relation to his
opponent and thereby succeed in winning, may be
called a heaven-born captain."
-Sun Tzu.
opponent and thereby succeed in winning, may be
called a heaven-born captain."
-Sun Tzu.
#3
Posted 24 October 2009 - 09:47 AM
I epoxy puttied a sanded out coupler to the side, works great.
#4
Posted 24 October 2009 - 09:48 AM
Sounds interesting. I might just put a very tiny strand of my extra strength hot glue on the cpvc cap thats on the end of the copper, and just put it on my BBB. That way it has just enough adhesive to stay but can be removed easily.
Edited by Noodleownz, 24 October 2009 - 09:49 AM.
It's Nerf or Nothin'!
#5
Posted 24 October 2009 - 04:29 PM
3/4 in. copper end cap will go over your 1/2 in. cpvc coupler good enough to hold it.
He's my slave. Or he will be. I promise when I take over youtube, I will enslave Uni13. That is all. DBNF
#6
Posted 24 October 2009 - 07:22 PM
On my RSCB'd bbb I just twisted the clip so it's pressed up against the side of the gun.
The yellow balls are also slightly smaller in diameter than the green ones.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users