Jump to content


Photo

Questions About Making A Rscb Clip


4 replies to this topic

#1 Noodleownz

Noodleownz

    Self-Fondler

  • Members
  • 510 posts
  • Location:Chicago / Minneapolis
  • State:Illinois
  • Country:United States

Posted 18 October 2009 - 04:44 PM

I'm going to make an RSCB clip but would like to know a few things, before I buy materials.

1. What size brass fits best into a 1/2 inch CPVC "T joint"?
2. What size brass fits 1/2 inch stefans (menards foam) loosely?

Edited by Noodleownz, 18 October 2009 - 04:44 PM.

  • 0
It's Nerf or Nothin'!

#2 nerfman600

nerfman600

    Member

  • Members
  • 141 posts

Posted 18 October 2009 - 05:05 PM

I'm going to make an RSCB clip but would like to know a few things, before I buy materials.

1. What size brass fits best into a 1/2 inch CPVC "T joint"?
2. What size brass fits 1/2 inch stefans (menards foam) loosely?

Use 1/2inch copper to fit the cpvc joint, but i think 17/32 brass would fit the stefans nicely.
  • 0
Signatures, phigmatures, who uses those anymore. Oh me.

#3 Possemhunter

Possemhunter

    Member

  • Members
  • 138 posts

Posted 18 October 2009 - 05:56 PM

If you are going to a store to buy the brass, or any barrel material, I always bring a few darts to test their fit. 9/16 or 17/32 should work. I personally made an angel breech with 9/16, but found a different supply of foam and put a piece of 17/32 down the org. barrel to get a tighter fit.
  • 0

#4 Hi Yah

Hi Yah

    Member

  • Members
  • 294 posts

Posted 18 October 2009 - 06:58 PM

Don't use brass. Use 1/2 inch copper to make the clip, this will fit the darts loosely and fit in the t-coupler. Use
1/2 CPVC for the barrel. CPVC will give you a tight dart/barrel fit, which you want when using a RSCB.

Edited by Hi Yah!, 18 October 2009 - 07:00 PM.

  • 0
The yellow balls are also slightly smaller in diameter than the green ones.

#5 father time

father time

    Member

  • Members
  • 170 posts
  • Location:CINCINNATI
  • State:Ohio
  • Country:United States

Posted 18 October 2009 - 09:15 PM

Maybe I did mine wrong, but my RSCB is just a piece of PVC with a cap on one end a PVC "T" on the other. with a CPVC elbow in the bottom a small piece of PVC (about an inch and a half) with 13 in piece of CPVC barrel shoved into it .

Edited by father time, 18 October 2009 - 09:16 PM.

  • 0
Ask her if she wants you to give her a multiple orgasm.
And when she looks stunned show her a picture of the blaster.
But if she gets excited. You're in.
-Miguel Ramos
Time is the one thing you can never escape.-Father Time


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users