Jump to content


Photo

Berserker Mod


16 replies to this topic

#1 numa-t49

numa-t49

    Member

  • Members
  • 119 posts

Posted 20 August 2009 - 07:20 AM

Start off with your Berserker

Posted Image

Remove the turret by unscrewing the 5 screws.

Posted Image

Now its time to remove the Ars. I used a hammer and a sccrew driver.

Posted Image

Now you are going to want to remove the bottom of the turret. With a cutting tool cut away less than 1/2 an inch from the bottom.

Posted Image

Now you are going to cut along the bottom of the lip at the top of the turret.

Posted Image

When cut, it should look like this:

Posted Image

Now using a cutting tool cut the top of the turret at each "v"

Posted Image

And when finished it will look like this:

Posted Image

Now make 20, 2.5 inch cpvc barrels.

Place the bottom of the turet back in the gun and screw the top back in.

Posted Image

Now begin to install the barrles. The cpvc should fit perfectly inside the bottom of the turret. I used hotglue and only in the top bart of the turret.

Posted Image

When intalled it will look like this:

Posted Image

Now on to the BBBB part of the gun.

Begin by opening up te gun and cutting the black tube about .25 of an inch after it is in the turret.

Next take a length if 3/8 brass that is 2 inches longer than the current black tube. Put e-tape on one of the ends and 2 inches fron the other end.

Posted Image

Now cut a 2in lentgh of cpvc and put it on the brass up to te e-tape.

Posted Image

Now put it in te black barrel and test it. You may need to add a spacer between the black barrel and the cpvc.

Once you are happy superglue the brass into the black barrel.

Posted Image

Now put the gun back together.

It should look like this:

Posted Image

Now add a coupler and a speed loader and you are done.
  • 0

#2 Soothsayer

Soothsayer

    Member

  • Members
  • 663 posts

Posted 20 August 2009 - 08:02 AM

This thing will never stop looking fucking ridiculous to me. Either way, nice write up, but your camera is distorting the colors of everything like no other.
  • 0

yeah I'm that guy who made that cool thing with the cool paint.


#3 soccerbeast003

soccerbeast003

    Member

  • Members
  • 206 posts

Posted 20 August 2009 - 08:53 AM

Great mod, I'll be sure to check back to this when I get a berserker.
  • 0
Christine Everheart: You've been called the Da Vinci of our time. What do you say to that?

Tony Stark: Absolutely ridiculous. I don't paint.

#4 bigred1rifleman

bigred1rifleman

    Member

  • Members
  • 414 posts

Posted 20 August 2009 - 10:21 AM

What ranges are you getting with the 20-shot part of the gun? It seems like a very good mod, and fairly clean, too. Don't you think that 3" or 4" would be better than 2.5"? Very nice job on the mod, I'll probably do this (with different barrels, of course).

Thanks
Finn
  • 0

#5 numa-t49

numa-t49

    Member

  • Members
  • 119 posts

Posted 20 August 2009 - 10:49 AM

What ranges are you getting with the 20-shot part of the gun? It seems like a very good mod, and fairly clean, too. Don't you think that 3" or 4" would be better than 2.5"? Very nice job on the mod, I'll probably do this (with different barrels, of course).

Thanks
Finn


Im getting like 35-40 on the turret with stock
like 80-100 with the bbbb

Edited by numa-t49, 20 August 2009 - 10:49 AM.

  • 0

#6 Ro-Sham-Bo

Ro-Sham-Bo

    Member

  • Members
  • 167 posts

Posted 20 August 2009 - 10:55 AM

I like this mod. It has the same qualities as your mum: clean, quick, and easy. Joking aside, (Edit:You posted ranges while I was typing)

Edited by Ro-Sham-Bo, 20 August 2009 - 10:56 AM.

  • 0
QUOTE(baghead @ Dec 31 2008, 07:58 PM) View Post

Wait a second? a Canadian National team... just won at Hockey!?

who would have ever seen that coming?


#7 tatertotguy

tatertotguy

    Member

  • Members
  • 189 posts

Posted 20 August 2009 - 01:15 PM

Great mod, precise and to the point. I've been waiting for good a writeup on the Berserker.
  • 0
"So thats when she says, 'No that's my belly button'."

#8 RVMVTVProductions

RVMVTVProductions

    Member

  • Members
  • 105 posts

Posted 20 August 2009 - 01:21 PM

Is cutting the barrel spacer like that completely necessary?

Because I believe Jerm78 and Gears have successfully modded a Berserker so without doing that.
And I'm pretty sure its not sheathed brass. At least, not on Jerm's.
  • 0
SCUN's South County Representative

#9 ice

ice

    Member

  • Members
  • 895 posts

Posted 20 August 2009 - 04:36 PM

Is cutting the barrel spacer like that completely necessary?

Because I believe Jerm78 and Gears have successfully modded a Berserker so without doing that.
And I'm pretty sure its not sheathed brass. At least, not on Jerm's.

Gears has a beserker? O shit! I'm in trouble at the next war...
  • 0
<!--quoteo(post=206428:date=Jan 25 2009, 05:17 PM:name=Mukersman)--><div class='quotetop'>QUOTE(Mukersman @ Jan 25 2009, 05:17 PM) View Post</div><div class='quotemain'><!--quotec-->
Turd stefans. When I pulled these out of the pillow case i was just like, what... the... fuck...
Muker
<!--QuoteEnd--></div><!--QuoteEEnd-->

#10 numa-t49

numa-t49

    Member

  • Members
  • 119 posts

Posted 21 August 2009 - 11:22 AM

Is cutting the barrel spacer like that completely necessary?

Because I believe Jerm78 and Gears have successfully modded a Berserker so without doing that.
And I'm pretty sure its not sheathed brass. At least, not on Jerm's.


I just used hot glue as my spacer because I cut my brass to long.
  • 0

#11 humfree

humfree

    Member

  • Members
  • 23 posts

Posted 21 August 2009 - 06:55 PM

I just got my berserker. I am doing a pvc barrel replacement. Should I use your lengths or not? Note:1/2'' pvc
  • 0
When your primary doesnt work, try your secondary
When your secondary doesnt work, hit someone with it and check their primary
If their primary doesnt work, go on hiting poeple until you find a gun that works
If no one is left concious when you find a gun that works, leave without warning.

#12 nerfboi

nerfboi

    Member

  • Members
  • 858 posts

Posted 21 August 2009 - 07:09 PM

It should be 1/2 CPVC not Sch. 40 PVC
  • 0
We Ride together, we die together, Bad boys for life.

#13 Hi Yah

Hi Yah

    Member

  • Members
  • 294 posts

Posted 21 August 2009 - 07:28 PM

How hard was it to remove the ar's out of the turret? I've heard they were a bitch to remove. Anyway, nice mod.
  • 0
The yellow balls are also slightly smaller in diameter than the green ones.

#14 humfree

humfree

    Member

  • Members
  • 23 posts

Posted 22 August 2009 - 11:47 AM

It should be 1/2 CPVC not Sch. 40 PVC

Oh, oops.
  • 0
When your primary doesnt work, try your secondary
When your secondary doesnt work, hit someone with it and check their primary
If their primary doesnt work, go on hiting poeple until you find a gun that works
If no one is left concious when you find a gun that works, leave without warning.

#15 numa-t49

numa-t49

    Member

  • Members
  • 119 posts

Posted 22 August 2009 - 02:58 PM

How hard was it to remove the ar's out of the turret? I've heard they were a bitch to remove. Anyway, nice mod.


It was annoying but once you get the rythem down it is easy.
They are still a bitch though.
  • 0

#16 humfree

humfree

    Member

  • Members
  • 23 posts

Posted 22 August 2009 - 03:56 PM

I just used some needle-nose pliers and got under the 'Lip'. Some were really soft(the plastic)and I had to nail them out.
  • 0
When your primary doesnt work, try your secondary
When your secondary doesnt work, hit someone with it and check their primary
If their primary doesnt work, go on hiting poeple until you find a gun that works
If no one is left concious when you find a gun that works, leave without warning.

#17 Banshee

Banshee

    Member

  • Members
  • 668 posts

Posted 22 August 2009 - 10:33 PM

Can anyone direct me to some decent internal pictures if there are any. I want to see the plunger size, the air tank, how it all works. I've seen pretty much nothing about these guns.
  • 0
Like my page on Facebook! PM me, I do commissions!


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users