Lately, my magstrike has been leaking air really bad. When I took it apart to find out what the problem is, I discovered that this part... is the cause of the problem. It leaks air when the bladder is full. If anyone knows how to fix this then please help me!!!
Need Help With Magstrike
the gun is leaking and i cant fix it...
Started by FEARNERFER, Aug 12 2009 12:40 PM
7 replies to this topic
#1
Posted 12 August 2009 - 12:40 PM
"Don't you just spray lube down the pinhole?"-Magic
#2
Posted 12 August 2009 - 01:14 PM
If you press down the trigger and it hisses at you, I'm pretty sure that you're fucked. I have the same problem.
#3
Posted 12 August 2009 - 01:48 PM
Well, since you have located the source of the problem, do a water test on it to figure out exactly where it's leaking. If it's one of the hoses, goop it, if it's the valve, buy a replacement off NH.
Gimme back my bullets....
#5
Posted 12 August 2009 - 03:21 PM
That happened to me to nothing would fix it, I decied to just take it back to the store.
#6
Posted 12 August 2009 - 09:35 PM
THAT PART IS A BITCH!
I have had mine leak, break, crack, any thing that can happen to it. IF IT WERE ME I WOULD BUY A NEW BLASTER. Or a valve from the "Trading" Forum.
I have had mine leak, break, crack, any thing that can happen to it. IF IT WERE ME I WOULD BUY A NEW BLASTER. Or a valve from the "Trading" Forum.
Edited by orogomi ninja, 12 August 2009 - 09:41 PM.
Thats the way I do it. Use a rag with some light fast rubbing.
Sometimes I hate my uncontrollable imagination....
#7
Posted 12 August 2009 - 11:13 PM
If it leaks from the green part sticking out, then yes, the leak is pretty much irreparable. If it leaks from the joints, however, you might be able to save it by cutting the joints off, sticking 1/8" brass in the holes, gooping it shut, then gluing and gooping tubing onto the new brass stubs.
It worked for me, but then shortly thereafter the piston sprung a leak (which was pretty much fatal for the Magstrike).
It worked for me, but then shortly thereafter the piston sprung a leak (which was pretty much fatal for the Magstrike).
#8
Posted 13 August 2009 - 12:50 PM
Thank you all for the advice, but I mangaged to fix it, so I don't need any more help.
"Don't you just spray lube down the pinhole?"-Magic
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users