Lanyard Sawed Of Shotgun Moddifacation
#1
Posted 09 August 2009 - 03:03 AM
Hear it is stock
lets get started.
start by unscrewing the gun their is a hidden screw under the for grip but u soul figure that out easily
internals pic
This is what we will focus on mainly today
this is almost identical in size to a longshot plunger tube
The multiple catch plates for selective power
The large and powerful spring
Compared to a bbb spring on the right
weird catch but i understand it well
and spring
dont post more on the way
#2
Posted 09 August 2009 - 03:13 AM
Next grab the plunger and remove the shock absorber
get a thick piece of foam im using pipe insulator
Cut that into a small enough circle to fit into the center of the plunger tube
Next step is improving the horrible seal on the gun using electrical tape
Go around 3 times well it matters how thick ur tape is it should look like this
New spring addition is crucial so i put a bbb spring and a recon spring
Fancy holes in the trigger
Next remove this piece
their are 4 screws remove all of them and get this off
remove this piece and set it aside u will need it later
drill the center out of the main barrel
make sure ur brass can slide freely thought that piece
then take the piece you set aside and drill that out till your brass can also slide freely through that piece too
Next sand out the small hole at the end of the plunger tube till u can barely squeeze the brass into it
#3
Posted 09 August 2009 - 03:14 AM
put the whole assembly back together
Put the springs together and back into the plunger etape the orange piece that stops the spring from getting out of the plunger it will make putting the gun back together less stress full
tis is what it should look like
Reassemble it and their u go a super stealth mod that u would never expect it was modified
sorry about the freaking huge pics my first post
I cannot check ranges with Stefan darts but with a stock buzz bee dart 40+ feet
Edited by J-DUB, 09 August 2009 - 04:44 PM.
#4
Posted 09 August 2009 - 01:29 PM
This is the NerfHaven profile of Northeast Designs. For more info visit https://www.facebook...p8OwIso&fref=nf
Old school Nerf engineer since 2008
#5
Posted 09 August 2009 - 03:33 PM
#6
Posted 09 August 2009 - 03:43 PM
Edited by Bedhed117, 09 August 2009 - 03:46 PM.
Anyone who's sig is a quote of themselves is an enormous douchebag.
Join the Revolution
#7
Posted 09 August 2009 - 05:24 PM
Also you might want to fix your grammar before an admin shows up. Also I think it's spelled Lanard not Lanyard.
Is grammar really that important around here??? That's a little strict...but the gun looks pretty nice overall.
#8
Posted 09 August 2009 - 05:41 PM
Oh, and resize your pictures. Its really annoying.
Other than that, its not that bad.
Edited by Renegademilitia15, 09 August 2009 - 05:42 PM.
FA_24's response to Ice's back pain thread:
I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.
#9
Posted 09 August 2009 - 11:48 PM
#10
Posted 10 August 2009 - 01:24 AM
EDIT: grammar mistakes....the irony..
Edited by yahman1254, 10 August 2009 - 01:26 AM.
#11
Posted 10 August 2009 - 01:53 AM
thats they only size of brass i had it isint important but the name is sawed of shotgun you knowYou're probably loosing a lot of range with that short barrel. Is it really that important that the gun look stock? Incidentally, I discovered that a 1/2 inch PVC coupler fits those massive stock darts nicely.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users