10 replies to this topic

[J-DUB]

OK just received my lanyard sawed of shotgun a few days ago and decided to make a write up on it
Hear it is stock

lets get started.
start by unscrewing the gun their is a hidden screw under the for grip but u soul figure that out easily

internals pic

This is what we will focus on mainly today

this is almost identical in size to a longshot plunger tube


The multiple catch plates for selective power

The large and powerful spring

Compared to a bbb spring on the right

weird catch but i understand it well

and spring


dont post more on the way

[J-DUB]

I didnt have any type of glue so i just got another torq spring and put it on their works fine

Next grab the plunger and remove the shock absorber

get a thick piece of foam im using pipe insulator

Cut that into a small enough circle to fit into the center of the plunger tube


Next step is improving the horrible seal on the gun using electrical tape

Go around 3 times well it matters how thick ur tape is it should look like this

New spring addition is crucial so i put a bbb spring and a recon spring

Fancy holes in the trigger

Next remove this piece

their are 4 screws remove all of them and get this off

remove this piece and set it aside u will need it later

drill the center out of the main barrel

make sure ur brass can slide freely thought that piece
then take the piece you set aside and drill that out till your brass can also slide freely through that piece too

Next sand out the small hole at the end of the plunger tube till u can barely squeeze the brass into it

[J-DUB]

put the whole assembly back together


Put the springs together and back into the plunger etape the orange piece that stops the spring from getting out of the plunger it will make putting the gun back together less stress full

tis is what it should look like

Reassemble it and their u go a super stealth mod that u would never expect it was modified


sorry about the freaking huge pics my first post
I cannot check ranges with Stefan darts but with a stock buzz bee dart 40+ feet

Edited by J-DUB, 09 August 2009 - 04:44 PM.

[stuck by stefan]

Ranges?

[Banshee]

Oh my god, resize your damn pictures man! And yeah, we nee some ranges or something.

[Bedhed117]

Is any thing inside it reinforced at all. Lots of stuff in there might crack with those strong springs pushing on them. Also you might want to fix your grammar before an admin shows up. Also I think it's spelled Lanard not Lanyard.

Edited by Bedhed117, 09 August 2009 - 03:46 PM.

[HMoney]

Also you might want to fix your grammar before an admin shows up. Also I think it's spelled Lanard not Lanyard.

Is grammar really that important around here??? That's a little strict...but the gun looks pretty nice overall.

[Renegademilitia15]

Its in the COC. You should follow it or you'll probably get banned.

Oh, and resize your pictures. Its really annoying.

Other than that, its not that bad.

Edited by Renegademilitia15, 09 August 2009 - 05:42 PM.

[flamincows]

You're probably loosing a lot of range with that short barrel. Is it really that important that the gun look stock? Incidentally, I discovered that a 1/2 inch PVC coupler fits those massive stock darts nicely.

[yahman1254]

Cool write-up, but please resize your pictures, I am sure someone can tell you an easy way to do that. About grammar, yes it is really important on this forum along with post relevance. The mods show no mercy when it comes to that stuff (I know first hand).

EDIT: grammar mistakes....the irony..

Edited by yahman1254, 10 August 2009 - 01:26 AM.

[J-DUB]

You're probably loosing a lot of range with that short barrel. Is it really that important that the gun look stock? Incidentally, I discovered that a 1/2 inch PVC coupler fits those massive stock darts nicely.

thats they only size of brass i had it isint important but the name is sawed of shotgun you know