I was just wondering if their was a solvent for plumbers goop as I gooped in the first piece of 9/16th brass in my angel breech and am now going back to re-do it, I cannot seem to get it out. I have tried ripping it out but it will not budge.
Thanks for any input,
Tornado
Solvent For Plumbers Goop?
Started by Tornado13, Aug 06 2009 03:03 AM
4 replies to this topic
#1
Posted 06 August 2009 - 03:03 AM
#2
Posted 06 August 2009 - 03:52 AM
Heat. I have had both goop and hot glue fail when in the heat. Try a blow dryer.
#3
Posted 06 August 2009 - 03:57 AM
Heat. I have had both goop and hot glue fail when in the heat. Try a blow dryer.
Ill try that.
Thanks,
Tornado
#4
Posted 06 August 2009 - 06:00 AM
In my experience with goop a little elbow grease should work most of the time.
The yellow balls are also slightly smaller in diameter than the green ones.
#5
Posted 06 August 2009 - 01:56 PM
I got it out. With a little blow drying and a god ol' hammering got it out. It was really in there!
Thanks, Tornado
Thanks, Tornado
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users