10 replies to this topic

[tack66]

Lets get started

Materials:
2 ds shells
Double shot

Tools:
Dremmel
Knife
Glue or epoxy

First open your doubleshot keep everything in place except the piece that touches the shells.
Set that piece aside and get your shells out.Stick the knife in the hole like so.

Twist the knife to make the hole larger then use your Dremmel to finish the hole.

To remove the peg take your dremmel and put it inside the hole you made earlier.Make sure this is done at an angle.


Repeat on both shells.


Apply glue to the rubber ring and place the shell on evenly so you get maximum air output.

Finished product

Now take the whole front barrel off the doublshot so its just the stock.
Re-place the string ao it runs out the back like so.This will be the new cocking mecanism.

Put the parts back in place screw the gun back together yada yada yada your done.
Ranges: 40-50 lower forty's with partly modded shell high 40's with fully modded shell.

Edited by tack66, 08 July 2009 - 08:29 PM.

[ZACHARIAH]

That my friend is cool and weird at the same time.

[tack66]

How so?

[Spud Spudoni]

I'm pretty sure this has been done before.

[Ner Commando]

What you should have done first is drilled holes in the back just about the size of the circle so you can use stefans and have no more air restrictors

[oh1134]

What you should have done first is drilled holes in the back just about the size of the circle so you can use stefans and have no more air restrictors

Or, you could just not use the shells entirely and use brass or pvc.

[nerfer63]

do my mod.

[Blue]

Don't center your posts. This writeup is like a weaker version of just CPVCing the gun. You can pop out the back of the shells to take out the pegs and put in whatever barrel material you want. I doubt your ranges are accurate.

[white moonlight]

Are those ranges with the gun tilted upwards, (arched)?

It looks very clean but remove the AR's and slap in some brass, PETG, or CPVC.

[Demo tay26]

It's a neat mod idea, but you could have used a different barrel material. Also, where's the trigger.

[tack66]

@demo tay26:I was trying to keep it as simple as possible,I took the picture before the gun was fully assembled.
@ white moonlight: No.Again keeping it easy to follow.
@blue:thanks for the tip.I could not figure out how to get the back out.
@nerfer63:I don't think you should link other mods in this thread there are several distinct differences.
@oh1134:keeping the mod simple.
@ner commando:thanks for the tip but as said drill is not working.
@spud spudoni:that doesn't mean it can't be done again.