Jump to content


Photo

Sspb Write-up

My Way

14 replies to this topic

#1 toxic

toxic

    Member

  • Members
  • 40 posts

Posted 29 June 2009 - 12:27 AM

So, I recently received a SSPB, courtesy of Coop. As soon as I got it I looked in the Modification Directory to see what’s been done with this gun so far so far. What I saw looked like it wasn't very at all sturdy or clean (no offence), so I did it a different way. On to the write-up.

So here's your stock SSPB:
Posted Image
Next remove the four screws and you should find this:
Posted Image
Now cut the barrel at this point where it first gets thinner:
Posted Image
Now we have to drill this out:
Posted Image
It should look like this when you’re done (I used a dremel for this):
Posted Image
Now cut a small bit a 1/2" PVC like so:
Posted Image
Now wrap one lay of e-tape around this part:
Posted Image
Now glue on like so:
Posted Image
Now cut about three inches of your barrel material (PETG, or Brass (I used17/32 with some PETG-like material on the end)):
Posted Image
Now glue that into the PVC:
Posted Image

Now you've got a sturdy and cleanly modded SSPB! Thanks to Coop for selling me the blaster. :ph34r:
  • 0
[17:33] FreyrDarth: Wait, you guys don't drink acetone?
[17:33] *** Toxic (Mibbit@dm-851.socal.res.rr.com) has joined #nerfchat.

#2 idk59

idk59

    Member

  • Members
  • 47 posts

Posted 29 June 2009 - 01:08 AM

Nice job although this has been done before. Ranges?
  • 0

#3 SPV999

SPV999

    Member

  • Members
  • 79 posts

Posted 29 June 2009 - 07:49 AM

I would do this, and integrate it into something if my SecretShot hadent sprung a leak a while back :ph34r:

And are those Nerf sunglasses? That's awesome.
  • 0
Concept mods in works:
#1) Codename: The Negotiator
#2) Codename: XXXG-00W0
#3) Codename: Punisher

#4 Coop

Coop

    #sogoodmuchtacticswowinit2winit360noscopehax0rleetbeastmodeactiv

  • Members
  • 775 posts

Posted 29 June 2009 - 09:02 AM

I would do this, and integrate it into something if my SecretShot hadent sprung a leak a while back :ph34r:

And are those Nerf sunglasses? That's awesome.


I think you mean Secret Strike, not Secret Shot.
The glasses are from the dart tag set, they're very common.


Nice mod, but I don't think this is really cleaner than the other peoples. And exposed brass isn't a great idea, it can dent easily.
  • 0

On the other hand, the guy who posted before me used the word 'fuck' a lot so he probably knows what he's talking about.


#5 fandango202

fandango202

    Member

  • Members
  • 73 posts

Posted 29 June 2009 - 09:18 AM

Nice mod although it's nothing revolutionary. I had a secret strike lying around with all the materials so I decided to do it. Now I can't get the god dam screws out of it. Has anyone found the screws to be particularly tight on this gun?
  • 0
When jesus gives you lemons save the recipt.

#6 white moonlight

white moonlight

    Member

  • Members
  • 305 posts

Posted 29 June 2009 - 09:25 AM

Nice mod although it's nothing revolutionary. I had a secret strike lying around with all the materials so I decided to do it. Now I can't get the god dam screws out of it. Has anyone found the screws to be particularly tight on this gun?


You may have stripped the screws, or if your lucky you may just be using a bad screwdriver.

Very cleanly done, but as Coop said, brass is easily dented.

Welcome to Nerfhaven.
  • 0
On his trec to Colonfest...
VengefulWaffle BOY, 12 KILLED IN MOUNTAIN PASS BY WILD RACCON, EXPERTS SAY HE ATTEMPTED TO HOLD IT OFF WITH NERF NITEFINDERS
POLICE SAY: ALCOHOL MAY HAVE BEEN INVOLVED
Guess who he was talking about...

#7 Hi Yah

Hi Yah

    Member

  • Members
  • 294 posts

Posted 29 June 2009 - 09:51 AM

Why didn't you cut the PVC a bit longer so it covers all of the brass?
  • 0
The yellow balls are also slightly smaller in diameter than the green ones.

#8 taerKitty

taerKitty

    Member

  • Members
  • 883 posts

Posted 29 June 2009 - 12:01 PM

I've found the Mod Directory to be a good starting point, but certainly not the end-all-be-all for what the Haven contains.

Very nice. I especially like the internal view head-on. Very clean.

Yes, it's been done before, but that doesn't mean each new write-up doesn't have the chance of bringing something new to the table.

As for ranges, I've heard claim 70' with a plugged pump, but mine is leaky so it gets 25'-35' immediately after pumping.

I've also heard quality control on these are abysmal, with DoAs at the 20-40% rate.
  • 0
Fugly is a feature.

#9 toxic

toxic

    Member

  • Members
  • 40 posts

Posted 29 June 2009 - 06:15 PM

idk59:Thanks. I'd probably estimate 50-60.

SPV999: That's to bad. Ya, the glasses come with any dart tag guns.

Coop: Thanks, I haven't worked with brass that much, but I'll try to get it covered soon.

fandango202: Yes, I know. I just thought I'd post it because I personally haven't seen anything like it before. No, I didn't notice the screws being especially tight.

white moonlight: Thank you.

Hi Yah!: I didn't really think about that at the time.

taerKitty: Thank you.
  • 0
[17:33] FreyrDarth: Wait, you guys don't drink acetone?
[17:33] *** Toxic (Mibbit@dm-851.socal.res.rr.com) has joined #nerfchat.

#10 ZACHARIAH

ZACHARIAH

    Member

  • Members
  • 41 posts

Posted 29 June 2009 - 07:15 PM

I would just like to know how you get 50-60 foot ranges and where you get brass?
  • 0
"When the pin is pulled Mr. grenade is not your friend." -US army training manual

#11 toxic

toxic

    Member

  • Members
  • 40 posts

Posted 29 June 2009 - 08:14 PM

I would just like to know how you get 50-60 foot ranges and where you get brass?


All i did is what you see in the write-up. I've got brass at Ace, and True Value, but the best place to look is a hobby shop.
  • 0
[17:33] FreyrDarth: Wait, you guys don't drink acetone?
[17:33] *** Toxic (Mibbit@dm-851.socal.res.rr.com) has joined #nerfchat.

#12 nerferler

nerferler

    Member

  • Members
  • 7 posts

Posted 30 June 2009 - 12:00 AM

nice mod..i'd like a bit more pvc, but it looks nice with the brass out too..
I'm not that experienced at modding, but is hobby shops the best place to look for 17/32s and 9/16s brass?..nice mod..again
  • 0

#13 toxic

toxic

    Member

  • Members
  • 40 posts

Posted 30 June 2009 - 02:16 PM

nice mod..i'd like a bit more pvc, but it looks nice with the brass out too..
I'm not that experienced at modding, but is hobby shops the best place to look for 17/32s and 9/16s brass?..nice mod..again


Thanks, and yes a hobby shop is the best place to look for any sized brass.
  • 0
[17:33] FreyrDarth: Wait, you guys don't drink acetone?
[17:33] *** Toxic (Mibbit@dm-851.socal.res.rr.com) has joined #nerfchat.

#14 ZACHARIAH

ZACHARIAH

    Member

  • Members
  • 41 posts

Posted 30 June 2009 - 09:11 PM

I would just like to know how you get 50-60 foot ranges and where you get brass?


All i did is what you see in the write-up. I've got brass at Ace, and True Value, but the best place to look is a hobby shop.

I have never seen brass at any hardware store in my life. I once tried almost the same thing with petg and the dart would barely leave the barrel.
  • 0
"When the pin is pulled Mr. grenade is not your friend." -US army training manual

#15 taerKitty

taerKitty

    Member

  • Members
  • 883 posts

Posted 30 June 2009 - 09:20 PM

I have never seen brass at any hardware store in my life. I once tried almost the same thing with petg and the dart would barely leave the barrel.

Ace Hardware seems a frequent referral, and my local Ace has K&S brass in 1' length for appx $4 a tube (varies a little with diameter.)

As for performance, SSPBs vary in quality a lot. You could have had a DOA.
  • 0
Fugly is a feature.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users