(again i'm new)
Edited by LNL + LS = win, 28 June 2009 - 12:57 AM.
Which One Is Best?
I'm new at this so please help!
Started by LNL plus LS equals WIN, Jun 27 2009 10:41 PM
-
This topic is locked
7 replies to this topic
#1
LNL plus LS equals WIN
-
- Members
- 106 posts
Member
Posted 27 June 2009 - 10:41 PM
hi nerfer's i'm buying a nerf gun with modman petg, so which is the best foam for it? (again i'm new)
(again i'm new)
Jun 24 2009, 02:57 PM
MY ASS IS GLORIOUS!
VACC
Ryan- Could you weigh the balls for extra oomph? Maybe cut one ball open (like a slit) and spread it so you could get some weights in there?
MY ASS IS GLORIOUS!
VACC
QUOTE(CA13 @ Aug 15 2009, 05:59 PM) 
Ryan- Could you weigh the balls for extra oomph? Maybe cut one ball open (like a slit) and spread it so you could get some weights in there?
#2
Kid Flash
-
- Members
- 1,985 posts
Member
Posted 27 June 2009 - 10:48 PM
Get loghome foam if you want to make your own stefans... I believe that that foam is pretty good for petg, although I also heard it varies in batches. I think swiftnerf has good stefans for petg... Try those out. FYI, being new is not an excuse.
#3
nerfer63
-
- Members
- 386 posts
Member
Posted 27 June 2009 - 11:10 PM
There are so many arguements on the perfect foam becasue it expands diffrently depending on the area you live in.
#4
LNL plus LS equals WIN
-
- Members
- 106 posts
Member
Posted 27 June 2009 - 11:15 PM
I'm going to be in dallas if that helps. 
Jun 24 2009, 02:57 PM
MY ASS IS GLORIOUS!
VACC
Ryan- Could you weigh the balls for extra oomph? Maybe cut one ball open (like a slit) and spread it so you could get some weights in there?
MY ASS IS GLORIOUS!
VACC
QUOTE(CA13 @ Aug 15 2009, 05:59 PM)
Ryan- Could you weigh the balls for extra oomph? Maybe cut one ball open (like a slit) and spread it so you could get some weights in there?
#5
nerfer63
-
- Members
- 386 posts
Member
Posted 27 June 2009 - 11:36 PM
Just try to find some nerfers in dallas and ask them.
#6
Salmon
-
- Members
- 447 posts
Member
Posted 28 June 2009 - 12:34 AM
Uh, not so easy. I mean, there are only like 30, maybe 40 nerfers in the entire state of Texas. And the only one I can think of from Dallas is SchizophrenicMC, and I believe he actually lives in Arlington.Just try to find some nerfers in dallas and ask them.
Anyway, If it's a springer you're buying, I recommend Best Materials black closed-cell foam, since it generally has a snug-but-not-too-tight fit in PETG. If it's an air gun, the red foam/stefans Mod Man sells should give you a nice loose fit.
Welcome to I-dont-care-isburg, population: me.
We're located in I-Don't-Give-a-Damn County, in scenic Shut-the-Hell-Up-achussets.
Maybe you're familiar with our annual charity drive where we ask for shit, and no one gives any.
We're located in I-Don't-Give-a-Damn County, in scenic Shut-the-Hell-Up-achussets.
Maybe you're familiar with our annual charity drive where we ask for shit, and no one gives any.
#7
white moonlight
-
- Members
- 305 posts
Member
Posted 28 June 2009 - 06:21 AM
It definetly depends on what gun you are buying.
You need a looser fit for an air gun, and a tighter fit for a springer.
If you are getting a springer I would use Hereticorps Mile High Black Foam, but if you are getting an
airgun then I would use either frostking, or swiftnerf foam.
You need a looser fit for an air gun, and a tighter fit for a springer.
If you are getting a springer I would use Hereticorps Mile High Black Foam, but if you are getting an
airgun then I would use either frostking, or swiftnerf foam.
On his trec to Colonfest...
VengefulWaffle BOY, 12 KILLED IN MOUNTAIN PASS BY WILD RACCON, EXPERTS SAY HE ATTEMPTED TO HOLD IT OFF WITH NERF NITEFINDERS
POLICE SAY: ALCOHOL MAY HAVE BEEN INVOLVED
Guess who he was talking about...
VengefulWaffle BOY, 12 KILLED IN MOUNTAIN PASS BY WILD RACCON, EXPERTS SAY HE ATTEMPTED TO HOLD IT OFF WITH NERF NITEFINDERS
POLICE SAY: ALCOHOL MAY HAVE BEEN INVOLVED
Guess who he was talking about...
#8
VACC
-
- Founders
- 3,265 posts
Vacc is Legend
Posted 28 June 2009 - 11:20 AM
We don't allow which is best threads, and that is the topic title.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
