Jump to content


Photo

How To Integrate A Firefly Turret

my new ZomBBB

20 replies to this topic

#1 AssassinNF

AssassinNF

    Member

  • Members
  • 904 posts

Posted 26 June 2009 - 08:44 PM

Yesterday, I finished yet another gun straight from the scrap pile - my ZomBBB: (ZombieBB, get it?)
Posted Image

It has half of a +bow spring in it, it has a Firefly turret on the front, and the handle has been moved to the side for reasons I cannot remember (I did that a looong time ago.)

It gets ranges in the 70's and occasional 80's.

While doing this mod, I took the opportunity to make a writeup on how to add a firefly turret to a gun.

Let's get started.

Rip the turret assembly out of your donor firefly. IIRC, you'll have to unscrew 5 screws.
Posted Image

Take out the screw in the center of the rotating mech and set all though pieces aside for now. Then unscrew the 6 screws (3 in front, 3 in back) from the turret:
Posted Image

Pry the turret apart with a flathead screwdriver:
Posted Image

All this shit falls out. Get rid of it.
Posted Image

Take a fairly long screwdriver, and punch out the peg pieces. You don't need/want those either.
Posted Image

Here's all the parts you should have now:
Posted Image
Here's the shit you don't need:
Posted Image
You also don't need the 6 screws you took out.

Now take a 1/2" drill bit (or a 17/32" one if you have it), and open up the holes in the back of the turret:
Posted Image
SAFETY WARNING: When drilling each hole, the drill bit will want to grab on to the part, and violently rip it out of your hands, spinning it wildly with the drill bit. This happened to me, and you can see where it took a small chunk out of my finger - I was lucky. You need to have a FIRM grip on the part. I suggest using vice-grips or channel-locks to hold on to the piece.

Take the larger pink part of the rotating mech, and shove it into a 1/2" PVC coupler as far as it will go. It will be a very tight fit.
Posted Image
On the other side of the coupler, cut it even with the pink piece:
Posted Image

Now start putting the turret back together, like this:
Posted Image
Posted Image
Posted Image
Posted Image
Then screw it together.

Please wait for PART 2.
  • 0

Probably dead by now, or something.


#2 AssassinNF

AssassinNF

    Member

  • Members
  • 904 posts

Posted 26 June 2009 - 09:14 PM

Now you've got this module that you can slap onto any gun you want:
Posted Image
At this point, you should add barrels to it. I used the stock barrels for my BBB, since my slugs fit them ok.

Here's how I attached the turret to my BBB.

First, you need to coupler your gun: (ignore the paint)
Posted Image

Then, add a 1 1/4" piece of 1/2" PVC:
Posted Image

Then add (glue) a 1" by 1 1/4" Piece of polycarb sheet, with a 3/8" hole drilled through the middle of it:
Posted Image

Now, attach those two assemblies with DUCK TAPE!
Posted Image
Just kidding - there is epoxy and hot glue under the tape. An alternative to this would be hose-clamping them together.
Make sure you line one of the barrels up with the polycarb piece!

At this point, two things could happen:
1. the seal is good as is.
2. the inherent slop in the firefly rotation mech makes the seal shit.

If #2 applies to you, you need a bracket to hold the Firefly turret against the polycarb seal piece. I used a 3" piece of polycarb 90' angle (McMaster part #1755K12). I cut one side to fit around the turret, and screwed the other side into the PVC piece.
Posted Image
Posted Image

Now you're done!
Posted Image

I painted it to match the gun:
Posted Image

Ammo holders:
Posted Image

More pics:
Posted Image
Posted Image
Posted Image

Q's/C's/F's?
  • 0

Probably dead by now, or something.


#3 taerKitty

taerKitty

    Member

  • Members
  • 883 posts

Posted 26 June 2009 - 09:26 PM

We have ranges, but there are two other camps in the "tastes great / less filling" debate of Nerf:
  • what's the accuracy like?
  • what's your rate of fire?
(edit) Great mod - I'm trying to do something like this right now, so this is very useful to me. The mod looks great, and a lot of fun to use.

Edited by taerKitty, 26 June 2009 - 09:27 PM.

  • 0
Fugly is a feature.

#4 white moonlight

white moonlight

    Member

  • Members
  • 305 posts

Posted 26 June 2009 - 09:29 PM

As always great job.

This paintjob is great.

I also find the BBB easier to prime with the handle on the side.

Nice use of the firefly turret as well, (once again).

Are those the original firefly ammo holders on the side fo the gun?
  • 0
On his trec to Colonfest...
VengefulWaffle BOY, 12 KILLED IN MOUNTAIN PASS BY WILD RACCON, EXPERTS SAY HE ATTEMPTED TO HOLD IT OFF WITH NERF NITEFINDERS
POLICE SAY: ALCOHOL MAY HAVE BEEN INVOLVED
Guess who he was talking about...

#5 X RUSHED X

X RUSHED X

    Member

  • Members
  • 32 posts

Posted 26 June 2009 - 10:06 PM

Are those the original firefly ammo holders on the side fo the gun?


I believe so.

Damn sexy mod, ANF. Looks very functional. Almost reminds me of OATN's 'BitchX'. Is it awkward to turn the turret after every shot with the handle in the way?
  • 0
QUOTE(Hipponater @ Oct 7 2009, 05:34 PM) View Post

If it feels hard to pump, stop.


#6 nerfer34

nerfer34

    Member

  • Members
  • 1,594 posts

Posted 26 June 2009 - 10:45 PM

Wow you're on a modding tear.

Great job again.

I might try something simliar with a tek 10 turret...
  • 0
<!--quoteo--><div class='quotetop'>QUOTE</div><div class='quotemain'><!--quotec-->God Damn it Groove, you stole my kill.<!--QuoteEnd--></div><!--QuoteEEnd-->-OMC

#7 umpshaplapa

umpshaplapa

    Member

  • Members
  • 636 posts

Posted 26 June 2009 - 11:09 PM

It auto-aligns due to the rotation mech right? I think you need to take a break from modding for a bit man. Creating so much awesomeness in such a short time can't be healthy.
  • 0
QUOTE(Talio @ Jun 29 2009, 01:50 PM) View Post

i got a black belt in noob banning in 2004.


#8 Shwanky

Shwanky

    Member

  • Members
  • 30 posts

Posted 26 June 2009 - 11:19 PM

I agree. You're going to run out of modding fuel.

Does it fire consistantly?

Edited by Shwanky, 26 June 2009 - 11:21 PM.

  • 0
I'm new to nerf but feel like I'm good at modding and at playing.

Currently modding every gun I can get my hands on.

Working on my own mod. I can't wait to finish and get the write-up...well written up. =)

#9 AssassinNF

AssassinNF

    Member

  • Members
  • 904 posts

Posted 27 June 2009 - 12:28 AM

We have ranges, but there are two other camps in the "tastes great / less filling" debate of Nerf:

  • what's the accuracy like?
  • what's your rate of fire?
(edit) Great mod - I'm trying to do something like this right now, so this is very useful to me. The mod looks great, and a lot of fun to use.

Accuracy is decent, and ROF is much better than a standard BBB.
Good luck with your mod.

As always great job.

This paintjob is great.

I also find the BBB easier to prime with the handle on the side.

Nice use of the firefly turret as well, (once again).

Are those the original firefly ammo holders on the side fo the gun?

Yes those are Firefly ammo holders.

Are those the original firefly ammo holders on the side fo the gun?


I believe so.

Damn sexy mod, ANF. Looks very functional. Almost reminds me of OATN's 'BitchX'. Is it awkward to turn the turret after every shot with the handle in the way?

It's not awkward at all, surprisingly.

Wow you're on a modding tear.

Great job again.

I might try something simliar with a tek 10 turret...

Hehe, I've just got alot of messed up old guns that need resurrecting.

It auto-aligns due to the rotation mech right? I think you need to take a break from modding for a bit man. Creating so much awesomeness in such a short time can't be healthy.

Yep, it auto-aligns.
Take a break? but then what would I do? :ph34r:

I agree. You're going to run out of modding fuel.

Does it fire consistantly?

Yes. Thanks to the bracket I built, the seal is near-perfect, and ranges are extremely consistant. It's fairly accurate, too, or at least as accurate as a short-barrel gun can be.


Thanks for the feedback, everyone! I'll be lending this gun out to people at a war tommorrow, so I'll let you guys know how well it works out on the battlefield.
  • 0

Probably dead by now, or something.


#10 Daniel Beaver

Daniel Beaver

    HQRSE CQCK

  • Moderators
  • 2,099 posts

Posted 27 June 2009 - 12:11 PM

Fantastic, I love this. You have convinced me to buy a damn firefly :P
  • 0

#11 Chadpuff

Chadpuff

    Member

  • Members
  • 165 posts

Posted 27 June 2009 - 04:44 PM

That thing not only is awesome looking but sexy as well. I want it to have my next children
  • 0
"Hokey religions and ancient weapons are no match for a good blaster at your side, kid." ...Han Solo

#12 Ryan201821

Ryan201821

    Prince Edward

  • Contributors
  • 1,892 posts

Posted 28 June 2009 - 10:21 PM

Awesome, I love it.

One thing I may suggest is having the rotation mechanism above the coupler that attaches to your BBB. This might remove the need to have a bracket since gravity will help seal the turret instead. The only negative with this is you'll be shooting out of the bottom barrel instead of the top. But I guess that's just personal taste.

I've been playing around with turrets and adding them onto my singled blasters. They work very well. I'll have to try throwing on a Firefly turret.

Great mod, keep up the good work.
  • 0

#13 italianhandgun

italianhandgun

    Member

  • Members
  • 19 posts

Posted 30 June 2009 - 04:53 PM

Would you be able to do this on a longshot? It seems this would help the RoF if your seals were good, only on previously singled longshots of course.

Anyways very good mod/write-up as always and of course keep 'em coming.
  • 0
QUOTE
violaters of the CoC should be forced to retype the entire CoC, word for word, without any errors (wich will then FORCE them to use grammar).

Oh the irony.

#14 navyseal849

navyseal849

    Member

  • Members
  • 44 posts

Posted 30 June 2009 - 06:34 PM

Wait so you manually rotate the turret and the mechanism clicks it into the right place?
Im assuming you could do this with a maverick turret also? (With slight modifications) That seems like it could be better on smaller guns...
  • 0
To stop yourself from having mood swings take a cyanide pill! Guaranteed to permanently prevent changes in your mood!
QUOTE(Hi Yah! @ Jun 28 2009, 07:45 AM) View Post

That thing is huge! You should get a leash for it.


#15 alextwin007

alextwin007

    Member

  • Members
  • 96 posts

Posted 30 June 2009 - 07:07 PM

Wait so you manually rotate the turret and the mechanism clicks it into the right place?
Im assuming you could do this with a maverick turret also? (With slight modifications) That seems like it could be better on smaller guns...



This wouldn’t work with a mav turret, but will work with most other turrets such as dtb.
  • 0
Join the revolution
Nerf Revolution

#16 AssassinNF

AssassinNF

    Member

  • Members
  • 904 posts

Posted 01 July 2009 - 12:47 AM

One thing I may suggest is having the rotation mechanism above the coupler that attaches to your BBB. This might remove the need to have a bracket since gravity will help seal the turret instead. The only negative with this is you'll be shooting out of the bottom barrel instead of the top. But I guess that's just personal taste.

That's a great idea. I have one more FF turret left, and what ever I put it on, I'll do it that way.

Would you be able to do this on a longshot? It seems this would help the RoF if your seals were good, only on previously singled longshots of course.

You could definitely do this to a longshot. But it would need to be carbine'd, and the turret would be fixed to the plunger tube. You'd need to add a handle to the plunger and cock it that way (like an xbow). Of course, that's not the only way to do it, but it would be the most functional way.

Wait so you manually rotate the turret and the mechanism clicks it into the right place?
Im assuming you could do this with a maverick turret also? (With slight modifications) That seems like it could be better on smaller guns...

Yes it does, and yes you could do it with a Mav turret.

Wait so you manually rotate the turret and the mechanism clicks it into the right place?
Im assuming you could do this with a maverick turret also? (With slight modifications) That seems like it could be better on smaller guns...



This wouldn’t work with a mav turret, but will work with most other turrets such as dtb.

This would most certainly work with a Mav turret. You'd just have to permanently affix the rotating mech to the turret first.
  • 0

Probably dead by now, or something.


#17 carlough

carlough

    Member

  • Members
  • 64 posts

Posted 01 July 2009 - 06:49 AM

Very nice work! Its very practical, and also pretty scary!!!
  • 0
RAZZLE FRAZZLE TO THE EXTREME!!!


#18 white moonlight

white moonlight

    Member

  • Members
  • 305 posts

Posted 01 July 2009 - 06:27 PM

Once again, great job.

Do you think you would get better ranges if you rebarreled it?

Seriously though, are all of your new mods going to have a firefly turret?!?
  • 0
On his trec to Colonfest...
VengefulWaffle BOY, 12 KILLED IN MOUNTAIN PASS BY WILD RACCON, EXPERTS SAY HE ATTEMPTED TO HOLD IT OFF WITH NERF NITEFINDERS
POLICE SAY: ALCOHOL MAY HAVE BEEN INVOLVED
Guess who he was talking about...

#19 AssassinNF

AssassinNF

    Member

  • Members
  • 904 posts

Posted 02 July 2009 - 12:02 AM

Once again, great job.

Do you think you would get better ranges if you rebarreled it?

Seriously though, are all of your new mods going to have a firefly turret?!?

I would definitely get better ranges if I re-barreled it, but I was running low on barrel material at the time.

Nope, not all of them. Only 3. You've already seen 2 of them. One firefly turret left. :ph34r:
  • 0

Probably dead by now, or something.


#20 diamondbacknf1626

diamondbacknf1626

    Member

  • Members
  • 835 posts

Posted 03 July 2009 - 03:20 PM

I noticed I hadn't commented in this...great job, man. I love seeing that you've posted a new topic in the mods section. I can't wait for the next to pop up. You could use a 1/8" thick piece of polycarb and just compensate by attaching the rotator mech of the turret farther back, right?

Again, good work. I look forward to seeing more.
  • 0
QUOTE(TxNerfer @ Nov 13 2010, 12:42 PM) View Post

Hey...I got a crazy idea: how about you stop all that sigging stuff? It's not even my thread and it annoys me.

#21 elf avec gun

elf avec gun

    Member

  • Members
  • 490 posts

Posted 24 July 2009 - 08:34 AM

If you feel that you are having problems with the seal, you should consider placing a piece of craft foam in the gap between the bbb barrel and the firefly turret, similar to what is on magstrikes, rf20s and the like. It will fill the gap, and allow you to still easily turn the turret. I have used this on my mav with positive results.
  • 0
"It's hard to imagine a more specific subset of nerd than our community. One day we shall be studied by a single sociologist whom the other sociologists will mock incessantly." ~VACC


Got Nerd?


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users