Question regarding the Angel Breech.
I noticed that he is using 19/32" on the barrel that comes out of the gun and the dart gets shoved into. If I have been using 17/32" for my darts would I need to use 17/32" on the barrel of the angel breech? Or do the tightening rings actually adress something like that?
9 replies to this topic
#2
ggk
-
- Members
- 113 posts
Member
Posted 19 June 2009 - 12:23 PM
Well the tightening rings help a little, but probably not enough. If you have darts that fit in 17/32 you should have used one size down for every piece of the breech.
Edited by ggk, 19 June 2009 - 12:23 PM.
17:18 Snake51886 to those who hamp: you do not nerf well, you paintball poorly
#3
LeRazor
-
- Members
- 19 posts
Member
Posted 19 June 2009 - 12:29 PM
does the 19/32" hold streamlines well?
Or a better question since I am about to buy the brass...does the angel breech as shown on the site handle streamlines (stock darts)
Or a better question since I am about to buy the brass...does the angel breech as shown on the site handle streamlines (stock darts)
Edited by LeRazor, 19 June 2009 - 12:33 PM.
#4
ggk
-
- Members
- 113 posts
Member
Posted 19 June 2009 - 12:54 PM
Well the 19/32" is not what holds the dart it just covers the breech. Also I dont think stock length streamlines fit I know they did not on mine.
17:18 Snake51886 to those who hamp: you do not nerf well, you paintball poorly
#5
Homestarune
-
- Members
- 189 posts
Member
Posted 19 June 2009 - 12:58 PM
If you have to ask what brass piece holds the darts, then you really shouldn't be trying to make an angel breach.
We're not discouraging people from joining a Nerf forum, we're discouraging them from joining this forum. It's an important distinction because, frankly, we don't give a shit. The Haven was created to escape the idiotic masses, now they're all here. -cxwq
#6
ggk
-
- Members
- 113 posts
Member
Posted 19 June 2009 - 01:19 PM
Well Homestarune I kinda agree but if he wants to waste the money he can go for it.
17:18 Snake51886 to those who hamp: you do not nerf well, you paintball poorly
#7
LeRazor
-
- Members
- 19 posts
Member
Posted 19 June 2009 - 01:34 PM
Thanks GGK.
My mistake on the sizes. Better quesion for this is actaully not about length but the girth of the dart. Better yet, never mind, I 'll just make it and see what happens.
My mistake on the sizes. Better quesion for this is actaully not about length but the girth of the dart. Better yet, never mind, I 'll just make it and see what happens.
Edited by LeRazor, 19 June 2009 - 01:36 PM.
#8
mystefansdontflystraight
-
- Members
- 1,176 posts
Member
Posted 19 June 2009 - 02:30 PM
Follow hereticorp's assault rifle write up to the dot, except don't put tightening rings in the 9/16ths brass that has the half pipe cut out of it. Zap a gap a piece of 17/32 there instead, you will be good to go.
QUOTE(Blacksunshine @ Dec 24 2009, 02:15 PM) 
QUOTE(white moonlight @ Dec 23 2009, 01:29 PM)
It's just screaming to be rearloading...
I seen a movie about that once.
#9
TantumBull
-
- Moderators
- 1,929 posts
Member
Posted 19 June 2009 - 02:36 PM
Your going to want to switch to stefans at some point. Wait until then before you make an angel breeched longshot. You will save yourself a lot of pain and suffering.
#10
Applefury
-
- Members
- 233 posts
Member
Posted 19 June 2009 - 03:31 PM
Follow hereticorp's assault rifle write up to the dot, except don't put tightening rings in the 9/16ths brass that has the half pipe cut out of it. Zap a gap a piece of 17/32 there instead, you will be good to go.
What the hell??
Didn't I ask you about this on IRC and you had a totally different answer.
QUOTE(Gamefreak @ Sep 29 2008, 07:03 PM)
Since you're too young to get a hotel, you should look around, maybe check some aim chatrooms.
Theres alot of really friendly, nice people out there, that'd be more than willing to accomodate a young boy.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
