Angel Breech Question
Posted 19 June 2009 - 12:16 PM
I noticed that he is using 19/32" on the barrel that comes out of the gun and the dart gets shoved into. If I have been using 17/32" for my darts would I need to use 17/32" on the barrel of the angel breech? Or do the tightening rings actually adress something like that?
Posted 19 June 2009 - 12:23 PM
Edited by ggk, 19 June 2009 - 12:23 PM.
Posted 19 June 2009 - 12:29 PM
Or a better question since I am about to buy the brass...does the angel breech as shown on the site handle streamlines (stock darts)
Edited by LeRazor, 19 June 2009 - 12:33 PM.
Posted 19 June 2009 - 12:54 PM
Posted 19 June 2009 - 12:58 PM
Posted 19 June 2009 - 01:19 PM
Posted 19 June 2009 - 01:34 PM
My mistake on the sizes. Better quesion for this is actaully not about length but the girth of the dart. Better yet, never mind, I 'll just make it and see what happens.
Edited by LeRazor, 19 June 2009 - 01:36 PM.
Posted 19 June 2009 - 02:30 PM
It's just screaming to be rearloading...
I seen a movie about that once.
Posted 19 June 2009 - 02:36 PM
Posted 19 June 2009 - 03:31 PM
Follow hereticorp's assault rifle write up to the dot, except don't put tightening rings in the 9/16ths brass that has the half pipe cut out of it. Zap a gap a piece of 17/32 there instead, you will be good to go.
What the hell??
Didn't I ask you about this on IRC and you had a totally different answer.
Since you're too young to get a hotel, you should look around, maybe check some aim chatrooms.
Theres alot of really friendly, nice people out there, that'd be more than willing to accomodate a young boy.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users