![Posted Image](http://i566.photobucket.com/albums/ss108/SonReeceSonJensen/04085.jpg)
Two aspects were involved:
1) Better Spring
2) Better barrels
In no way did I achive either of these, but you can now learn from my mistakes.
Ace spring: perfect size an hella more power
![Posted Image](http://i566.photobucket.com/albums/ss108/SonReeceSonJensen/040814.jpg)
First problem: The pressure of the new spring bends the cocking rod (har har), so I replaced it with more better metal. Here you see the old piece (removed) and the piece I cut off a weight grip.
![Posted Image](http://i566.photobucket.com/albums/ss108/SonReeceSonJensen/040813.jpg)
BUT…The holder for the cocking rod will now be ripped out.
Here is the solution: 1/16” steel cable secured around the cocking rod mechanism bar thing.
![Posted Image](http://i566.photobucket.com/albums/ss108/SonReeceSonJensen/05035.jpg)
FAIL #1
The barrels
I tried to put 10 pieces of 1.25” 17/32 brass with e-tape in the now pegless holes
![Posted Image](http://i566.photobucket.com/albums/ss108/SonReeceSonJensen/040816.jpg)
This gun was designed by heartless soul-murderers: There is no way to do this easy.
The only wayto do this right is to have either a 17/32 drill bit or to remove significant portions of the turret…like in the mod directory.
If you fill the top and the bottom in with 9 sticks of hot glue it in no way makes a seal.
![Posted Image](http://i566.photobucket.com/albums/ss108/SonReeceSonJensen/04136.jpg)
![Posted Image](http://i566.photobucket.com/albums/ss108/SonReeceSonJensen/04135.jpg)
FAIL #2
Only good aspect: you can take the accents off for easy painting.
![Posted Image](http://i566.photobucket.com/albums/ss108/SonReeceSonJensen/04134.jpg)
So I singled the b-word and threw it in the bottom of my Nerf bin to rot and die. I hate it, I hate all Tek 10’s, they can all die in fire.
![Posted Image](http://i566.photobucket.com/albums/ss108/SonReeceSonJensen/Tek10singled.jpg)