Brass Breech Problem
#1
Posted 12 June 2009 - 08:51 PM
(I've made sure there are no points of contact between the two pieces. Is it possible that I just just a slightly oversized piece?)
"ah man, I would give you so much for one of those NIB crossbows or one of those crossbows on the floor. The ones on ebay have gone up to $59 and the shipping alone is $12." -Rip32
#2
Posted 12 June 2009 - 08:54 PM
*EDIT*
Did you also clean up the inside of the cut on the 9/16th piece?
Edited by atomatron, 12 June 2009 - 08:57 PM.
Rainbow Clan
#3
Posted 12 June 2009 - 08:54 PM
Kruger and Dunning (1999)
#4
Posted 12 June 2009 - 10:13 PM
"ah man, I would give you so much for one of those NIB crossbows or one of those crossbows on the floor. The ones on ebay have gone up to $59 and the shipping alone is $12." -Rip32
#5
Posted 12 June 2009 - 11:06 PM
Edited by The Kart Racing Nerf Man, 12 June 2009 - 11:07 PM.
Paste this into your sig if you are a Mac.
#6
Posted 13 June 2009 - 12:25 AM
Edited by pjotrkuh, 13 June 2009 - 12:26 AM.
#7
Posted 13 June 2009 - 07:58 AM
#8
Posted 13 June 2009 - 11:01 AM
I am not sure about you, but all of my brass comes with little stickers telling the size of the pipe. After I take off those stickers I have to be sure to completely sand off all of the residue or the brass has trouble sliding. Try that.
Yes I would agree with that. Also, if the brass is old, tarnishing could be a problem. Or they might be slightly dented.
#9
Posted 13 June 2009 - 11:07 AM
#10
Posted 13 June 2009 - 12:08 PM
Wouldn't Goo-Gone also work?I am not sure about you, but all of my brass comes with little stickers telling the size of the pipe. After I take off those stickers I have to be sure to completely sand off all of the residue or the brass has trouble sliding. Try that.
Rainbow Clan
#11
Posted 13 June 2009 - 12:48 PM
Wouldn't Goo-Gone also work?I am not sure about you, but all of my brass comes with little stickers telling the size of the pipe. After I take off those stickers I have to be sure to completely sand off all of the residue or the brass has trouble sliding. Try that.
Lots of methods would work.
#12
Posted 13 June 2009 - 01:04 PM
Edited by CROW, 13 June 2009 - 01:04 PM.
"ah man, I would give you so much for one of those NIB crossbows or one of those crossbows on the floor. The ones on ebay have gone up to $59 and the shipping alone is $12." -Rip32
#13
Posted 13 June 2009 - 01:30 PM
If at first you don't succeed, add more epoxy.
#14
Posted 13 June 2009 - 01:36 PM
#15
Posted 13 June 2009 - 04:44 PM
Edited by SorrowX, 14 June 2009 - 01:27 PM.
#16
Posted 13 June 2009 - 06:36 PM
~nrg
VindictivePancake~ "i've seen hot 10 year olds" - T2heavy
t2hevey~ "yupp"
(\ /)
(='.'=) <--Me
(")_(")
#17
Posted 14 June 2009 - 12:40 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users