Cut a CPVC coupler and put it in a PVC coupler.
Cut the PVC and put on the coupler you made.
Now take a PVC T coupler and cap it off. You can use a normal coupler for this but i was out
Cut a small part of CPVC and put a coupler on it and put in the T coupler.
Put the PVC on the T coupler.
Cut a CPVC barrel.
The gun must be primed down to keep the dart from being pulled in the plunger tube.
A vid of it
Edited by imperious, 11 June 2009 - 10:08 PM.