#1
Posted 05 June 2009 - 02:39 PM
So onto the mod first open her up. No pick of that sorry. oh and dont mind the picture dates they are way off.
then set the rest of the gun aside except for the turret this is where the whole mod takes place.
fisrt take out these five screws
then throw this whole part of the turret away
\
but make sure to keep this part
then simply glue pieces of 2.5 inch cpvc to each of the risen nub holes.
like this
then do that 20 times till you have a perfect turret for more stability put hot glue here
here is what it should look like.
#2
Posted 05 June 2009 - 02:41 PM
and I reinforced the pump
all back together
ranges are the same with stock and stephans for some reason a couple hit 70 but most of them hit high 50's and low 60's
I can take more pictures of anything upon request
Questions?Comments?Flames?Insertion into the mod directory?
#3
Posted 05 June 2009 - 02:50 PM
Sorry to hear that man, it's like that one famous bumper sticker, "Shit Happens"
#4
Posted 05 June 2009 - 03:03 PM
EDIT: Holy crap, when I looked at this a second time, the date on those pictures made me think I contributed to a necro haha.
Edited by Liam, 05 June 2009 - 03:04 PM.
#6
Posted 05 June 2009 - 05:50 PM
#7
Posted 05 June 2009 - 06:17 PM
Note to self: Buy a Wildfire
He'd make a great candidate for smear the queer. Give him an eliminator and set him free.~BladeMaster:NHQ
#8
Posted 05 June 2009 - 07:01 PM
-twice as loud as a RF20
-The flames makes it fire twice as fast.
That's about it. And thanks Angela who helped me with these pictures.. It looks huge in her hands.
HOLY CRAP!
FU ALL
#9
Posted 05 June 2009 - 08:24 PM
Wow never knew. Also for the barrels I would sand them all down flush with a disc sander.here's couple fun facts about the Wildfire:
-twice as loud as a RF20
-The flames makes it fire twice as fast.
Sorry to hear that man, it's like that one famous bumper sticker, "Shit Happens"
#10
Posted 05 June 2009 - 08:45 PM
-twice as loud as a RF20
I agree. Liter Size brought one to ChANO 2. You could here it from across the park, it sounded like a suppressed firearm of somesort.
Finn
#11
Posted 05 June 2009 - 11:50 PM
#12
Posted 06 June 2009 - 10:33 AM
Looks like I'm selling mine then.
Nice job, nonetheless.
If someone could possible find a way to make those barrels detatchable, you could make several of them, like a Titan Scattercannon.
Whatever, lol. Looks like you just produced a pretty seet primary, if silenced.
... to be able to get a better burst or sustained fire, rather than blowing the whole load at once.
#13
Posted 09 June 2009 - 09:20 PM
Finn
Edited by bigred1rifleman, 09 June 2009 - 09:22 PM.
#14
Posted 09 June 2009 - 10:48 PM
I've seen this mod done with the RF20, and I'll DEFINITELY be doing it with mine!
Nice touch with the pump rod. Have you plugged the valve in the bladder yet?
Is it just me, or does the paint job look like live-action Optimus Prime?
#15
Posted 09 June 2009 - 11:28 PM
I just got a Wildfire myself, and it ROCKS! The trigger leaks a bit during the first few pumps, but works fine once you build up enough pressure to seal the valve. (Hint to anyone complaining of leaks, TRY THIS FIRST!)
I've seen this mod done with the RF20, and I'll DEFINITELY be doing it with mine!
Nice touch with the pump rod. Have you plugged the valve in the bladder yet?
Is it just me, or does the paint job look like live-action Optimus Prime?
No I have not plugged the bladder air release valve because I see no need to, becasue if I do and the bladder ruptures I loose a great primary. And I reiforced the pump becasue it was already bent, my grandmother got it at the thrift store.
#16
Posted 09 June 2009 - 11:52 PM
I just got a Wildfire myself, and it ROCKS! The trigger leaks a bit during the first few pumps, but works fine once you build up enough pressure to seal the valve. (Hint to anyone complaining of leaks, TRY THIS FIRST!)
I've seen this mod done with the RF20, and I'll DEFINITELY be doing it with mine!
Nice touch with the pump rod. Have you plugged the valve in the bladder yet?
Is it just me, or does the paint job look like live-action Optimus Prime?
No I have not plugged the bladder air release valve because I see no need to, becasue if I do and the bladder ruptures I loose a great primary. And I reiforced the pump becasue it was already bent, my grandmother got it at the thrift store.
I did this mod awhile ago, and I plugged the OPR release because it was leaking. I pumped it quite a bit, and the bladder was actually tearing the gun in half, I mean actually splitting it open, at the back, where the OPR is normally activated. I wouldn't worry about your bladder bursting.
#17
Posted 09 June 2009 - 11:57 PM
I just got a Wildfire myself, and it ROCKS! The trigger leaks a bit during the first few pumps, but works fine once you build up enough pressure to seal the valve. (Hint to anyone complaining of leaks, TRY THIS FIRST!)
I've seen this mod done with the RF20, and I'll DEFINITELY be doing it with mine!
Nice touch with the pump rod. Have you plugged the valve in the bladder yet?
Is it just me, or does the paint job look like live-action Optimus Prime?
No I have not plugged the bladder air release valve because I see no need to, becasue if I do and the bladder ruptures I loose a great primary. And I reiforced the pump becasue it was already bent, my grandmother got it at the thrift store.
I did this mod awhile ago, and I plugged the OPR release because it was leaking. I pumped it quite a bit, and the bladder was actually tearing the gun in half, I mean actually splitting it open, at the back, where the OPR is normally activated. I wouldn't worry about your bladder bursting.
Holy crap that is a strong bladder.
#18
Posted 15 June 2009 - 02:33 AM
Edited by princexbuster, 15 June 2009 - 10:26 AM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users