8 replies to this topic

[amerikanidiot154]

Hey guys,


I know its been a while since i posted, and I apologize.
Recently I acquired a Big Blast modded slug style from splitlip, and gave him a stock longshot. This worked out well, because I had an insufficient amount of money and tools.

Anyway Back to the topic!


Here it is.

Image courtesy of splitlip.

Anyway, I had a question. Is it possible to use a vulcan chain in a 1 1/4" to 1/2" pvc adapter? A speed loader, is a good thing. But reloading takes a while. I just need a more efficient way of reloading.

Thanks Again Slplitlip!
questions? comments? flames?

[1337]

Vulcan chains fit very nicely INSIDE half inch PVC.

[amerikanidiot154]

Thanks 1337. I'll try it. I just need a fast reload system for APOC. I'll try it.

[Lt Stefan]

The ranges will not be as good because of a shorter barrel.

[spartan062]

The ranges will not be as good because of a shorter barrel.

Lt. Stefan, I think what he is going for is ROF.

Edited by spartan.062, 17 May 2009 - 03:49 PM.

[JATDO]

wouldnt the range (depending on you barrel material now) increase, and the accuracy be crap?

But yes the ROF will be good.

[Reagent X]

I actually used a vulcan chain at the Mission Imbroglio war, and i got decent rangers (90+) and a fairly fast rate of fire (about 20 shots per minute.) Yes, this does work. 1337 is correct, I used 1/2 inch PVC.

Edited by Reagent X, 20 May 2009 - 10:57 PM.

[amerikanidiot154]

I actually used a vulcan chain at the Mission Imbroglio war, and i got decent rangers (90+) and a fairly fast rate of fire (about 20 shots per minute.) Yes, this does work. 1337 is correct, I used 1/2 inch PVC.

thanks man

[Pearson2]

I was thinking either an Angel breech through the barrel with a clip, possibly a gravity clip (though I would never do it due to constant jamming) or my personal favorite, the MRT upgrade which would fit nicely on a big blast.

Personally though I never liked the ROF of a big blast due to all the pumping needed before shooting.