Help With Kbarker's Nite Finder Rifle
#1
Posted 16 May 2009 - 07:34 PM
Any help would be appreciated.
#2
Posted 16 May 2009 - 07:39 PM
But if you look at this video
What video?
#3
Posted 16 May 2009 - 07:40 PM
#4
Posted 16 May 2009 - 07:40 PM
#5
Posted 16 May 2009 - 07:44 PM
#6
Posted 17 May 2009 - 02:00 PM
#7
Posted 17 May 2009 - 02:05 PM
You could just PM him.I need help with Kbarker's rifle. I have everything working as of now. But if you look at this video I'm curious as to what parts he used at the end of the plunger tube for coupling the barrel onto the plunger tube. What parts were used for that?
Any help would be appreciated.
#8
Posted 18 May 2009 - 11:54 PM
The parts used on the end of the plunger was a female-female coupler of some kind (not sure what size) that was PVC, not CPVC. I noticed that a 1/2" CPVC coupler fit pretty tightly in it. The larger coupler was turned down on a lathe (not something your average modder has). The CPVC coupler was expoxied into the larger one and that was epoxied onto the plunger tube. I added a screw in as well to make sure the glue didn't break from the plunger impact.
I've created a new page on my website that has all of my Nerf pictures, in better quality than Putfile had: http://www.teamveloc...cs.com/Nerf.htm
I'll add more captions later.
PMs generally work for me (I get an email), but if I forget to clear them out the inbox fills up and it won't take any more.
Edited by KBarker, 18 May 2009 - 11:56 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users