Strange Bbb Occurrence...
#1
Posted 30 April 2009 - 07:07 PM
#2
Posted 30 April 2009 - 07:11 PM
#3
Posted 30 April 2009 - 07:15 PM
#4
Posted 30 April 2009 - 07:24 PM
So could you use it as a "blast fire" type gun now?
*edit*-sorry I didn't read the first post right.
Edited by JATDO, 30 April 2009 - 07:26 PM.
#5
Posted 30 April 2009 - 07:25 PM
#6
Posted 30 April 2009 - 07:38 PM
#7
Posted 30 April 2009 - 07:47 PM
#8
Posted 30 April 2009 - 07:55 PM
It probably slipped out the back on to the ground at the place you were at.
If that was so, we would have found it when we cleaned up half an hour later.
Is it possible that the catch spring wasn't there in the first place? Just a guess, as I have had nerf guns function without them in the past.
That wouldn't explain the fact that it just wasn't priming. No parts were damaged at all, and were hardly used beforehand.
Edited by RVMVTVProductions, 30 April 2009 - 08:09 PM.
#9
Posted 30 April 2009 - 10:24 PM
Is the shell not staying back or is the plunger rod catch not re-engaging when you push it forward? If it's the shell, check the catch for the shell (it's the little orange pin that sticks out near the back of the front half) for wear and springs and check the catch face on the shell for wear. If it's the plunger rod catch, just replace the spring with one from a clicky pen.That wouldn't explain the fact that it just wasn't priming. No parts were damaged at all, and were hardly used beforehand.
#10
Posted 30 April 2009 - 11:08 PM
#11
Posted 01 May 2009 - 03:18 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users