6 replies to this topic

[soccerbeast003]

I have recently acquired a LnL. I have replaced the spring with an autogrip. I have wrapped etape around the plunger head. I have gooped a 4 inch barrel to the plunger tube. But, I have not been getting the ranges I want; it's actually pretty terrible. If I ramrod a stefan down the barrel, It won't even leave the barrel.
So my question is, what is the problem with it?
Pics:

[1337]

What ranges are you getting now? did you wrap so much e-tape that it's slowing down plunger speed?

[soccerbeast003]

What ranges are you getting now? did you wrap so much e-tape that it's slowing down plunger speed?

I'm pretty sure that the e-tape is not the problem. But, when I ramrod the dart halfway down the barrel, it goes about 38 feet flat.

Edited by soccerbeast003, 28 April 2009 - 03:55 PM.

[Hi Yah]

Have you lubed the plunger head yet? If not, that is most likely your problem.

[b00m13]

Basic recommendations I can give are:

Make sure your stefan aren't too loose inside the barrel.

&

Make sure the barrel length itself isn't too long for a spring handgun; 3", 3.5", 4" are pretty good for most (personally I usually stick with 3"-3.5").

PS Grats on getting a LnL, I actually got to try one a few days ago, and those things are great pistols!!

[CaptainSlug]

What's the barrel length? Looks to be too long by an inch.

[soccerbeast003]

Have you lubed the plunger head yet? If not, that is most likely your problem.

No I haven't.

I will cut the barrel and try a tighter dart and get back to you.

Thank you CaptainSlug and Boom13, surprisinling my LnL now shoots 75 feet! I rebarreled it with cpvc, heres a picture:

Edited by soccerbeast003, 28 April 2009 - 05:41 PM.