16 replies to this topic

[HeracrossKid]

I hope this belongs here...

I was bored one day. Then I found a Mav turret. I also found a 2" x 1/2" PVC bushing. Oh joy.

This is the result:


To make the seventh barrel, I basically sanded out the hole in the middle of the turret and hot glued a portion of an lbb barrel in there. I then filled all the dead space in the back with hot glue.



I then got rid of the three screw posts in the back of the turret.



I took my 2" x 1/2" bushing and cut the back to reduce some dead space. I left about 1/8 of an inch.



To make it attach to a 1/2 coupler, I took a small piece of PVC and supergued it to the bushing



I superglued the turret and the bushing together, and came up with this:

the finished product



With unplugged BBBB and sonic micros, I acheived a range of 35' flat. It's not too great, but it's something good to do if you have a spare turret. This thing is great for indoor wars.

This is my first topic here, I hope I don't die...

UPDATE!



After plugging up the 7th shot, I got a range closer to 45 feet.

Edited by HeracrossKid, 26 April 2009 - 06:46 PM.

[Renegademilitia15]

I've seen this done before, but never in a write up. Good job.

[idk59]

Good job there.

It only gets 35 ft. Not the best ranges but think on the bright side; mavericks only hit about 20ft flat anyway.

[TantumBull]

It's pretty clean, I like it.

I suggest getting rid of that 7th barrel, because do you really need 7 darts to be shot at once? and it will increase ranges.

[Nerf300]

On top of what Tantum said, you can plug the pump and up the ranges to 50' or so.

[oh1134]

One problem you might run into is that the seventh barrel hogs up all of the air like this:

Does that crappy paint picture explain it? If not I could improve it.
Otherwise, you did a great job. My failed CPVC turret designed for my titan still sits on my desk... Alone... And leaking...

Edited by oh1134, 26 April 2009 - 08:03 AM.

[deadshooter711]

A barrel replacement would also increase ranges.

I have three of these. This gives me a very compact but useful idea.

Edited by deadshooter711, 26 April 2009 - 08:56 AM.

[Basilisk]

Nice first mod. Very creative, the 7th barrel will probably decrease the range for all of them so you should remove it. Its clean too, thats a plus.

[Nerf300]

As everyone states here you should do:

Plug the middle barrel.
Plug the pump.

Hope we helped

[NerfRogue83]

As everyone states here you should do:

Plug the middle barrel.
Plug the pump.

Hope we helped

And you felt the need to tell him again, why? "It thinks before it posts or it gets the hose again."

On topic--Nice job, very clean and useable mod.

[loni]

Good job there.

It only gets 35 ft. Not the best ranges but think on the bright side; mavericks only hit about 20ft flat anyway.

Too bad he was usng a BBB and not a maverick. In this situation the maverick was just an attachment to shoot 7 darts at once. But yes for a "SHOTGUN ATTACHMENT" the ranges are pretty good, considering its going to be used for rushing and close quarters combat.

-Loni

Edited by loni, 26 April 2009 - 10:09 AM.

[X RUSHED X]

Despite what the others here say, if you still want that seventh shot but want to pump up ranges a little bit, make the back of the middle barrel a bit smaller. Surrounding the outer wall of the middle barrel with hot glue and maybe some electrical tape/epoxy will make for lesser air flow to the default center barrel and allow for more equal airflow. Sorry for lack of a picture, but PhotoBucket is being a douchebag to me today.

Edited by X RUSHED X, 26 April 2009 - 03:47 PM.

[HeracrossKid]

Thanks for all the support, guys! I actually prefer not to plug pumps on my air guns because I don't really trust myself. I thought about it and I'll probably plug up the 7th barrel. I want bettter ranges, dammit!

[Hi Yah]

Thanks for all the support, guys! I actually prefer not to plug pumps on my air guns because I don't really trust myself. I thought about it and I'll probably plug up the 7th barrel. I want bettter ranges, dammit!

While at it you might aswell do a tank expansion.

[plubby]

Hey does anybody know how to get a nitefinder to be clip fed or any way to put a type of barrel on it?

[CaptainSlug]

Hey does anybody know how to get a nitefinder to be clip fed or any way to put a type of barrel on it?

This post has aboslutely NO RELEVANCE to this thread, but atleast you can spell and use punctuation.

Check the Modification directory or use the search function.
http://nerfhaven.com...?showtopic=7150

[HeracrossKid]

Hey does anybody know how to get a nitefinder to be clip fed or any way to put a type of barrel on it?

Please don't hijack my topic. Take your crap somewhere else.

Aww, Sluggy beat me to it...

Edited by HeracrossKid, 26 April 2009 - 06:42 PM.