10 replies to this topic

[ArsenicAnarchy]

http://nerfarmoury.w...hotoid=27364103

My personal site I created to stop my friends from calling me immature. Less crowded than N.H. but only me and my friend are on it. Please explore it.

Back to my recon. I painted it black and white. Just no picks yet. I'll get them up next week if it survived the move. If not I"ll have to fix it. It accepts any dart. Its the new version of the recon, the one with the cover over the armed bar. One day I was shooting it and the back of the armed bar came off. I had the A.B. from my old recon lying around so I could replace it. I was very happy.


Ranges (streamlines)

Flat: 50ft

Angled: 50-65ft

Its nearly stock. Only A.R. removal and a "barrel replacement". Its more powerful than before though so Im not complaining. My parents were pissed when they found out i shot through their lamp shade. 5 times!

I might scrap it for its spring to put it in the Longshot i got. I havent decided. ITs a good secondary but the barrel keeps falling off.


Ok i singled it and I use the cilp to hold ammo. The barrel is superglued on and coverd in e-tape. It keeps bending down. I'm going to make a brass breech when I get to the states to replace the barrel im using, which is mainly for looks. Its not my fault the barrel isnt strait. Out here you need a lisense to buy plumers goop and a bunch of other crap. I got the barrel from my vulcan when i sawed it off. Its my second major mod.

Edited by ArsenicAnarchy, 25 April 2009 - 09:13 AM.

[cheesypiza001]

ITs a good secondary but the barrel keeps falling off.

Try using Epoxy.

[umpshaplapa]

ITs a good secondary but the barrel keeps falling off.

Try using Epoxy.

Or plumbers goop+ something else.

[ilzot]

ITs a good secondary but the barrel keeps falling off.

Try using Epoxy.

Or plumbers goop+ something else.

Or posting this in the Modifications and Paintjobs thread. If you don't know where it is, find it. Familiarize your self with it. This board is for modification questions and write ups.

[hardshot]

In the picture of your recon on your site, the barrel looks huge and doesn't look strait at all. Also is it only taped on? Please try to use a different (smaller barrel matarial) preferably 1/2 inch cvpc, 1/2 inch petg or around 1/2 inch brass. Also try useing plumbers goop to prevent leaks. Wiht this you should be able to get much better ranges.

[flashflint]

Does the clip still stay in OK?

[Capten Karat]

Does the clip still stay in OK?

I think he singled it.

Try using Super glue & E-Tape for stability of the front barrel. Does the "barrel" house another smaller barrel? Because if not like stated before you should probobably add some smaller barrel material.

[TantumBull]

I think he singled it.

Then why does he have a loaded clip in the stock?

[Capten Karat]

I think he singled it.

Then why does he have a loaded clip in the stock?

The clip adds stability to the stock.

[PointBlank]

Yah, you seriously need to get the front end straight.

[ArsenicAnarchy]

I think he singled it.

Then why does he have a loaded clip in the stock?

The clip adds stability to the stock.

I use it to hold ammo