19 replies to this topic

[The Kart Racing Nerf Man]

i was wondering what tool you use for applying tightening rings for a brass breeched longshot that i am working on.
i have looked on the forums and i have not found anything yet about this.
also this is my first topic post so please do not leave any horrible comments
thanks

Edited by The Kart Racing Nerf Man, 24 April 2009 - 08:39 PM.

[Shrub]

Pipe Cutters just make sure you don't accidentally cut all the way through.

[The Kart Racing Nerf Man]

like this one?

http://www.homedepot...uctId=100001470http://www.homedepot...uctId=100001470

[diamondbacknf1626]

like this one?

http://www.homedepot...uctId=100001470http://www.homedepot...uctId=100001470

Yes. Those would do the job.

[The Kart Racing Nerf Man]

ok thank you so much

[alextwin007]

If you do accidently cut the brass too far shot me a PM. I found a way to fill the small hole created if you cut too much.

[The Kart Racing Nerf Man]

If you do accidently cut the brass too far shot me a PM. I found a way to fill the small hole created if you cut too much.

ok thanks

[cheesypiza001]

like this one?

http://www.homedepot...uctId=100001470http://www.homedepot...uctId=100001470

Yes. Those would do the job.

Don't buy that one. It is listed at $144. You can get good ones for about $25.

[umpshaplapa]

like this one?

http://www.homedepot...uctId=100001470http://www.homedepot...uctId=100001470

Yes. Those would do the job.

Don't buy that one. It is listed at $144. You can get good ones for about $25.

I got some for $8. They work fine for me.

[diamondbacknf1626]

like this one?

http://www.homedepot...uctId=100001470http://www.homedepot...uctId=100001470

Yes. Those would do the job.

Don't buy that one. It is listed at $144. You can get good ones for about $25.

Wow, didn't even notice. I just thought he meant a more general "Is this the kind of tool you use?" to which I'd answer yes. But no, if those are $144, don't get them...ever.

[The Kart Racing Nerf Man]

like this one?

http://www.homedepot...uctId=100001470http://www.homedepot...uctId=100001470

Yes. Those would do the job.

Don't buy that one. It is listed at $144. You can get good ones for about $25.

Wow, didn't even notice. I just thought he meant a more general "Is this the kind of tool you use?" to which I'd answer yes. But no, if those are $144, don't get them...ever.

ok thanks i will look for them at lowes or home depot ttomorrow

[wingd man]

I got mine for $2.50. they work fine, although I would like some PVC cutters... Anyways, get the cheap ones from ACE.

[The Kart Racing Nerf Man]

I got mine for $2.50. they work fine, although I would like some PVC cutters... Anyways, get the cheap ones from ACE.

so i get the cheap pipe cutters for tihtening rings from ace?

[Blacksunshine]

I got mine for $2.50. they work fine, although I would like some PVC cutters... Anyways, get the cheap ones from ACE.

so i get the cheap pipe cutters for tihtening rings from ace?

Wherever you can find them is fine. They don't have them that cheap at Ace. Your best cheap bet is Harbor Freight.

[The Kart Racing Nerf Man]

ok thanks black sunshine

[lambchop]

Well here is a link to the page of pipe cutters. The first one is 14.99 and it looks exactly the same as the one at homedepot for $145. The link to pipe cutters.

Edited by lambchop, 25 April 2009 - 03:31 PM.

[Blacksunshine]

IIRC they should have one for around 4 bucks.

Ahh there it is.
http://www.harborfre...temnumber=40913

[CaptainSlug]

so i get the cheap pipe cutters for tihtening rings from ace?

Please improve your capitalization and punctuation.
http://nerfhaven.com...?act=boardrules

[Shrub]

Then get some sandpaper and simulate the blade dullness in minutes.

[The Kart Racing Nerf Man]

Ok, thanks you guys.

Sorry Captain Slug for errors.