1/2 inch CPVC
This will be a easy mod but affective I also spray painted it Black. I made this mod up myself so give me the credit. I Don't know how to upload pictures from my camera so I will tell you.
1. Open up your recon
2. Take out the long tube that the AR is in
3. Their is a line on the tube cut there
4. Then cut of the part the plunger head goes on so yo will have cut the ends of KEEP THEM
5. Throw away the piece that was in the middle this piece has the AR in it
6. Replace the middle piece with CPVC, hot glue it
7. Put every thing back together.
The cocking is a little rough but it increases the range about 15 - 20 ft
Edited by Wenie288, 24 April 2009 - 12:40 PM.