First off open up your gun the internals should look like but with the turret
First take out the turret and throw it into your parts bin. Take out the black plunger tube and take out the little black nub.
Now dremel that little line next to the air out put hole (not sure of what it is called) and then wrap etape around the hole. Cut a 4 inch piece of your barrel material and stick it on the etape. Before you do this put hotglue or epoxy around the plunger where the barrel will go.This is what mine looks like.
Put your gun back together and now you have a airtech 1k with range of 50+ feet. The finished product
Questions, comments, flames.
Edited by lambchop, 21 April 2009 - 07:13 PM.