I resently got a new titan and when the pressure gauge is turned around to see it when I am pumping it leaks like crazy! But whan it is turned around the other way it doesent leak at all! Is this normal or is my titan just screwed up?
Titan Problem
Started by pheonix, Apr 08 2009 05:06 PM
7 replies to this topic
#1
pheonix
-
- Members
- 46 posts
Member
Posted 08 April 2009 - 05:06 PM
You will be 100 years old and nerver have touched a nerf gun.
I am getting out of this wonderful hobby unfortunately. (mostly)
I am getting out of this wonderful hobby unfortunately. (mostly)
#2
b00m13
-
- Members
- 386 posts
Member
Posted 08 April 2009 - 05:13 PM
Did you mod the Titan already or is it stock?
Sometimes it's just a bad assembly job that would leave small openings that are temporarily closed, but opens when over pressured or twisted open (I have it happen to my button valves a few times; if I have them turned a certain direction when not even pressed, there's a small leakage, so I'd have to find the perfect direction and learn to live with it that way). If you don't plan on using the gauge in the future anyways, just cut it's tube off and seal it with hot glue/plumber's goop/etc. and problem solved
Sometimes it's just a bad assembly job that would leave small openings that are temporarily closed, but opens when over pressured or twisted open (I have it happen to my button valves a few times; if I have them turned a certain direction when not even pressed, there's a small leakage, so I'd have to find the perfect direction and learn to live with it that way). If you don't plan on using the gauge in the future anyways, just cut it's tube off and seal it with hot glue/plumber's goop/etc. and problem solved
The only place Wal-Mart exists in New York, is in our TV's.
#3
pheonix
-
- Members
- 46 posts
Member
Posted 08 April 2009 - 05:15 PM
It is a stock titan and I plan on moding it this week so is it a good idea to take off the gauge?
You will be 100 years old and nerver have touched a nerf gun.
I am getting out of this wonderful hobby unfortunately. (mostly)
I am getting out of this wonderful hobby unfortunately. (mostly)
#4
NerfCrazy
-
- Members
- 497 posts
Member
Posted 08 April 2009 - 05:37 PM
My friend has this same problem.
#5
canadiannerf
-
- Members
- 81 posts
Member
Posted 08 April 2009 - 05:45 PM
My friend has this same problem.
When you mod it just take it off and recover that tube with something
Plus, the regular cocking slide (Can't sig me now bitches! ) is much faster.
Muker
92% of teens would cry if Miley Cyrus was about to jump off a building.
If you are part of the 8% who would say "Jump B****, JUMP!!!!" . . .
Copy and paste this in your signature.
Muker
92% of teens would cry if Miley Cyrus was about to jump off a building.
If you are part of the 8% who would say "Jump B****, JUMP!!!!" . . .
Copy and paste this in your signature.
#6
b00m13
-
- Members
- 386 posts
Member
Posted 08 April 2009 - 06:02 PM
It is a stock titan and I plan on moding it this week so is it a good idea to take off the gauge?
Oh that part's up to you if you intend to mod it. I would recommend cutting off the tubing that connects it to the air tank/chamber, and sealing up the hole with some hot glue. The gauge itself could be left on or taken off, it won't do anything. Personally I'd just leave it on unless I have use for that space that it's taking up, but other then that, it's a nice for cosmetics.
The only place Wal-Mart exists in New York, is in our TV's.
#7
PointBlank
-
- Members
- 528 posts
Member
Posted 08 April 2009 - 09:03 PM
I suggest sealing it off, it is pretty much pointless and is a waist of air.
#8
Kalex
-
- Members
- 62 posts
Member
Posted 09 April 2009 - 03:52 PM
I was thinking of using the tube to the gauge to integrate a hornet into the casing. Would that work?
QUOTE(VACC @ Dec 3 2008, 07:51 AM) 
Remember kids, only you can prevent herpes! Or was it something else? Dirty fucking bear.
VACC
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
