37 replies to this topic

[Roschili]

Is the barrel hard to take apart or put back together? Thanks.

[Salindin Naz]

Is the barrel hard to take apart or put back together? Thanks.

Dude, crack 'er open and find out.

[conray4]

The same thing just happened to me.

[mr grunty]

i have the same problem. i'm planning on buying some plumbers goop and use fiber to lower the amount of recoil strain on the plunger, but i heard you need a license for 'goop

[Roschili]

Is there anyway to make a recon shoot all types of darts without doing a barrel replacement?

[Alexiumz]

I've heard that by simply removing the barrel tooth may let you do this, however I haven't tried it so I can't say for certain.

[Roschili]

I've heard that by simply removing the barrel tooth may let you do this, however I haven't tried it so I can't say for certain.

If I did that would the gun still work? Also I assume that is the long piece on the top of the plunger that juts out?

[Alexiumz]

The dart tooth is the piece that sticks up through the barrel when the bolt is anything other than fully forward. Look down the barrel and pull the slide back slightly - remove that bit.

[Roschili]

The dart tooth is the piece that sticks up through the barrel when the bolt is anything other than fully forward. Look down the barrel and pull the slide back slightly - remove that bit.

Oh Ok, how do I get that piece out?

[Alexiumz]

If you open up your gun, just underneath the barrel there is a plastic column with a spring on the end. Thats the bit you want out. To do that you'll need to unscrew the piece holding it in, just to the left, and unscrew and remove the barrel. Then it will simply slide out.
Remember that I'm not guaranteeing this will work!

[Roschili]

If you open up your gun, just underneath the barrel there is a plastic column with a spring on the end. Thats the bit you want out. To do that you'll need to unscrew the piece holding it in, just to the left, and unscrew and remove the barrel. Then it will simply slide out.
Remember that I'm not guaranteeing this will work!

It is still worth a try

[CaptainSlug]

Is there anyway to make a recon shoot all types of darts without doing a barrel replacement?

Your continued refusal to utilize the search function has earned you a month away from the forums.

Enjoy.

In case you were not aware, this forum is not here to hand-feed you whatever information you seek. It is however a reference, but you have to put in the minimal amount of effort required to find what you are looking for. There are two threads pertaining to the information you asked for. Both of which are in the modification directory.
http://nerfhaven.com...showtopic=10593
http://nerfhaven.com...showtopic=10444

Edited by CaptainSlug, 26 May 2009 - 11:25 AM.

[Jacobi Schpack]

The samt thign happened with mine. i tyried making a puddle of hotglue on a napkin, putting the broken end in the puddle and letting the hotg lue take the shape of the hole and then tore tyhe napkin. IT DID NOT WORK. i think the width of the peice has something to do with it. Good Luck and Godspeed (good luck)