16 replies to this topic

[imperious]

Minimized long shot the ms-1

Start by cutting the gun like this.


Put a pvc to cpvc coupler in the plunger tube and add foam and springs to the plunger rod.




Then put a wire on the plunger rod and add a keyring.




Cut the gun here then put parts in place.




Now reassemble the gun.






Its hiting 80-90ft.

Tell me if i misspelled.

Edited by imperious, 24 March 2009 - 07:56 PM.

[ice]

Glad to see you used my priming system, but it was done wrong. Mine will be up in a few days.

[Nerf Bros]

Wow that's impressive... I thought when I clicked the link I would see another long shot shorty, but that is the most unique mod I've seen in a while. Is the key ring annoying to use? One problem with the gun is that the rate of fire in greatly decreased without the clip, but that's really not that big of a deal... Once again, great job.

-nerfbros

[imperious]

The key ring is not annoying because the gun is so small.
And ice when you post your priming system. I will make the same priming system for my gun.

Edited by imperious, 22 March 2009 - 09:26 PM.

[1337]

I really like that. like a longshot pistol. could you just use a PVC coupler or a CVPC coupler, instead?


by the way...

Tell me if i miss spelled.

Fail.

[imperious]

I really like that. like a longshot pistol. could you just use a PVC coupler or a CVPC coupler, instead?


by the way...

Tell me if i miss spelled.

Fail.

Yes you could use a PVC coupler or a CVPC coupler.

[diamondbacknf1626]

This is kind of cool, actually. Not my personal preference, but it's a cool idea. It reminds me of the Longbow that someone came up with recently, actually, just even smaller. I'll be interested to see what kind of ranges you get.

1337, I guess you could call it a LS pistol, but it still seems a tad bulky to be a sidearm.

[balisticjoe]

Glad to see you used my priming system, but it was done wrong. Mine will be up in a few days.

And my longbow minimization idea-i will say that the bar in the front highly decrease the hold of the plunger tube-and unless you re-enforce it it will bust out of the front. and you should try to add a stock.

[imperious]

Glad to see you used my priming system, but it was done wrong. Mine will be up in a few days.

And my longbow minimization idea-i will say that the bar in the front highly decrease the hold of the plunger tube-and unless you re-enforce it it will bust out of the front. and you should try to add a stock.

Ok i will work on that thanks

[PointBlank]

That is really cool, for some reason I laugh when I look at it, its just so funny looking. Good work.

[Foamfoot]

Glad to see you used my priming system, but it was done wrong. Mine will be up in a few days.

Oh, well, looky here!

Edited by Foamfoot, 23 March 2009 - 05:45 AM.

[manofnerf]

Wait, wouldn't the wire jump up and wang you in th face once you fired it?

[imperious]

Wait, wouldn't the wire jump up and wang you in th face once you fired it?

No

[PointBlank]

Wait, wouldn't the wire jump up and wang you in th face once you fired it?

I don't think that would happen unless he held his face right up to it like a rifle.. It is probably shot more like a pistol.

[nerfer63]

I think its hiting 60ft.

Tell me if i misspelled.

holy shit what spring did you add the make my gun shittier spring and try a longer barrel for better ranges.

[RVMVTVProductions]

Crap. I made the exact same thing a month ago, but it broke, and I was reassembling it yesterday. What bad timing for me.

However, my wire kept slipping off, so now I know that gluing it on will work. Edit- After looking at ice's writeup, I think I will drill it instead.
I work on a write-up for a better way to attach coupler now... (I did that on purpose)

Edited by RVMVTVProductions, 23 March 2009 - 06:26 PM.

[imperious]

New stuf

New priming system.



Re-enforced the bars in the front.



About the size of a maverick with the minimization


Its hiting 80-90ft.

Tell me if i misspelled.

Edited by imperious, 24 March 2009 - 10:44 AM.