Edited by lambchop, 22 March 2009 - 07:18 PM.
#1
Posted 22 March 2009 - 07:03 PM
#2
Posted 22 March 2009 - 07:15 PM
Wait a second? a Canadian National team... just won at Hockey!?
who would have ever seen that coming?
#3
Posted 22 March 2009 - 07:17 PM
#4
Posted 22 March 2009 - 07:29 PM
http://nerfhaven.com...c=13619&hl=foam
#5
Posted 22 March 2009 - 07:40 PM
#6
Posted 22 March 2009 - 08:52 PM
Ever use Mile High foam. Its the same stuff. I have used it, its fine. Need a low temp hot glue gun though.This foam is on the fbr directory. I am curious if it is any good.
Church... gotta soak up that Jesus!
NERFSTRONG #51
#7
Posted 23 March 2009 - 07:02 AM
#8
Posted 23 March 2009 - 07:27 AM
You can use a medium temp glue gun as well. You might just be holding the tip in to long.Ever use Mile High foam. Its the same stuff. I have used it, its fine. Need a low temp hot glue gun though.This foam is on the fbr directory. I am curious if it is any good.
#9
Posted 20 April 2009 - 08:41 PM
Yeah i think so.Will it fit cpvc or sch 80 pvc?
#10
Posted 20 April 2009 - 08:53 PM
CPVC? Yeah, right. Not gonna happen without some major stretching. In Sch. 80 PVC, it seems a little loose, though I don't really have much experience with that type of barrel material. For spring-powered blasters, try PETG, or 9/16" brass with either tightening rings at the back, or a little bit of 17/32" brass nested. The PETG has an almost perfect fit, a tad bit tight, but excellent for a spring gun. I mean, you don't have to twist the dart, but it certainly isn't like it slips in. 9/16 brass has an absolutely perfect fit, but it's a tiny bit too loose for a springer. Tightening rings or nested 17/32 solves that. Which one to use is your choice. Tightening rings are less consistent, but you have to twist the dart in if you nest 17/32" brass in there.Yeah i think so.Will it fit cpvc or sch 80 pvc?
Hope this will be of some assistance to you! Welcome to the 'Haven.
~Salmon
Edited by Salmon, 20 April 2009 - 08:54 PM.
We're located in I-Don't-Give-a-Damn County, in scenic Shut-the-Hell-Up-achussets.
Maybe you're familiar with our annual charity drive where we ask for shit, and no one gives any.
#11
Posted 20 April 2009 - 08:57 PM
Edit: But hell, maybe I just got a really bad batch.
Edited by Foamfoot, 20 April 2009 - 09:04 PM.
(Unofficial) Wii thread
Damn it Foamfoot. Why is it that you kill every good topic with a retarded response a few days late.
#12
Posted 20 April 2009 - 09:17 PM
Edited by CoasterDynamix757, 20 April 2009 - 09:18 PM.
#13
Posted 20 April 2009 - 09:23 PM
I don't think this is MH foam then. I use MH foam from heriticorp, and my darts stay together fine; as long as you don't shoot your walls from close range.I have this, it's terrible. The darts are not durable at all. They don't go very far, and the foam is about as tight as (overtly sexual comment here) in pretty much every barrel you put it in. It's awful, I end up losing most darts after one shot with a med/high-powered gun.
Edit: But hell, maybe I just got a really bad batch.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users