7 replies to this topic

[rokor]

Hello Haven. I'm modding my SupaSplat Triggerblaster for tomorrow, and I'm stuck. I can't seem to get the trigger hooked up correctly. The metal spinner thingy doesn't seem to be in the right place. For those who don't own one, you will have no idea what it is even with pictures, so I'm hoping some with knowledge of this blaster can help me out.

P.S. If someone has internal pictures aswell, that'd be even better.

[TantumBull]

Not sure if this is the gun you're talking about, but here's a pic from the internals directory:

[rokor]

Yup, that's the on JSB. I looked in the internals directory, and it wasn't there. I searched in many search engines and found almost nothing on this blaster. I think it has a lot of potential because of the way it holds air. It fills up both the airtank, and around the pump, making it a powerful semi auto shot. I am nearly done, so a clear write-up is almoost impossible to do, but I can post a thread with internals/details when I'm done.

[TantumBull]

Yup, that's the on JSB. I looked in the internals directory, and it wasn't there. I searched in many search engines and found almost nothing on this blaster. I think it has a lot of potential because of the way it holds air. It fills up both the airtank, and around the pump, making it a powerful semi auto shot. I am nearly done, so a clear write-up is almoost impossible to do, but I can post a thread with internals/details when I'm done.

Woah, I was just reading the review in the link JSB posted and it sounds like that thing has a ton of potential. With a breach and a pump replacement that thing'll be a beast. Definatley post that thread. If you decide not to post it on the boards, do you think you could shoot me a PM to tell me how it went?

[mystefansdontflystraight]

HAHAHAAHHAHA. That is the gun I got thrown out of the bay downtown for dissasembling the pump system while it was on display zip-tied to a manikin. Yeah, a lot of potential. Pump replacement required, the pump is tiny. It took me 15 pumps to get any decent airflow out the barrel. Unfortunately, I didnt buy it but I look forward to seeing the monstrosity you spawn in person soon.
HOLY ASSCRABS PENISCAR BATMAN JESUS TAPDANCING CHRIST. 1000th post.

[rokor]

It actually has quite a large pump, but the way the trigger/tank pin works is with a wheel, so when you pull the trigger the wheel spins only letting out a certain amount of air. It can fire off roughly 20shots before you need to pump again. I most likely will replace the pump though, because of the weird check valve it has. It takes almost a full stroke of a 3k pump to fill up the tank, and lets out a very powerful(but small) shot of air. I will definetly post a review thread of this thing as it is almost as it doesn't exist on these forms.

[TantumBull]

It actually has quite a large pump, but the way the trigger/tank pin works is with a wheel, so when you pull the trigger the wheel spins only letting out a certain amount of air. It can fire off roughly 20shots before you need to pump again. I most likely will replace the pump though, because of the weird check valve it has. It takes almost a full stroke of a 3k pump to fill up the tank, and lets out a very powerful(but small) shot of air. I will definetly post a review thread of this thing as it is almost as it doesn't exist on these forms.

Hmm, I bet you could modify the wheel or the primary firing tank to allow more air to go out. Less shots, but if the air it lets out isn't enough to propel a dart 70 feet or more, probably worth it.

[rokor]

I think I'll have it set up like my semi-auto 3K, where you just pull the trigger and if you want a good rate of fire do it fast, if you want range let it sit for a second.