Jump to content


Photo

What Can I Ship With?


8 replies to this topic

#1 Yazzeh

Yazzeh

    Member

  • Members
  • 132 posts

Posted 15 March 2009 - 07:52 PM

Hi, I'm being asked for a commission for a Gravity Hammer and it's going to be big. It's a foam weapon, 90 inches long, and most likely roughly 10 x 10 inches in width and depth. It will probably weigh around 10 pounds.

The problem is how to ship it from Montreal, Quebec, Canada to New York, USA. I've tried looking at a few sites and the only one that has accepted the dimensions has been UPS. The cheapest shipping was $76 CAD, which is probably more expensive than the cost of the weapon will be.

Anyone have any ideas of what I could ship with at a more reasonable price?
  • 0

#2 thedarksideofnerf

thedarksideofnerf

    Member

  • Members
  • 124 posts

Posted 15 March 2009 - 08:01 PM

Make the buyer pay for shipping.
  • 0
<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad

#3 Hipponater

Hipponater

    Member

  • Members
  • 297 posts

Posted 15 March 2009 - 08:14 PM

Only way to reduce the cost would be to send it in pieces. Something that big and heavy will cost a ton, more of a regular sized box is probably the only way to go.
  • 0

#4 A side of nerf

A side of nerf

    Georgia Nerf Lives

  • Members
  • 755 posts

Posted 15 March 2009 - 08:24 PM

Only way to reduce the cost would be to send it in pieces.


Perhaps with the head separated from the handle shaft...
Maybe they could be joined with strong Velcro patches.
I guess it all depends on the client, but if they ant to ct shipping, they should go with Hipponator's method.
  • 0
Southeast Nerf Contingent

#5 Ro-Sham-Bo

Ro-Sham-Bo

    Member

  • Members
  • 167 posts

Posted 15 March 2009 - 08:28 PM

Depending on the location in NY, it could be cheaper to drive it there.
  • 0
QUOTE(baghead @ Dec 31 2008, 07:58 PM) View Post

Wait a second? a Canadian National team... just won at Hockey!?

who would have ever seen that coming?


#6 Yazzeh

Yazzeh

    Member

  • Members
  • 132 posts

Posted 15 March 2009 - 09:12 PM

Well the 10 pound estimate is being generous. It'd probably be more like 6-7 pounds.

I can't separate the pieces because that would lead to structural weakness. I can't make anything that I wouldn't feel safe in the hands of an angry alcoholic. It's my personal philosophy to only make things that are safe enough for children to fight with without any thought to consequence, or that adults with too much enthusiasm don't maim each other with.

So, modularizing it is out of the question for me. Maybe I could convince them to come pick it up, it'd be cheaper. XD
  • 0

#7 Draconis

Draconis

    I am not Lord Draconical

  • Members
  • 2,712 posts

Posted 15 March 2009 - 10:05 PM

Check with ground freight companies. I was able to ship a fully insured, $9000 dental crown making machine from Oregon to Texas for about $150. It was on a full size pallet. Make sure you check with Greyhound too. I remember from my Honda tuning days that the only way to send a body kit was by Greyhound.
  • 0
[15:51] <+Noodle> titties
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?

#8 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 16 March 2009 - 06:37 PM

Motor freight can be especially affordable if you can ship from a business address to another business address. But for residential-to-residential, usually not so much.

Edited by CaptainSlug, 16 March 2009 - 06:38 PM.

  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#9 Darth Tom

Darth Tom

    Member

  • Members
  • 80 posts

Posted 16 March 2009 - 07:49 PM

I know you ruled out modularity, but ti can be done easily and sturdily.

A possible system could be foam coated PVC. Use threaded couplers, maybe one by the head of the hammer and one half way down the shaft. This would greatly reduce the overall size, and maintain the structural integrity of the piece. If the 6' of pipe flexes too much, you could nest a smaller size of pipe inside. Have a slip coupler on the inside pipe, and threaded on the outside. This way, you could still connect the inner piece of pipe while threading the outside on.

Another possibility would be to just reason it out with the customer. You can pay $70 to have it shipped in one piece, or I can ship it in 3 for $30, and you can invest in a $3 can of PVC cement. Either way, he's paying.

Edited by Darth_Tom, 16 March 2009 - 07:50 PM.

  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users