Dual Blasters
#1
Posted 14 March 2009 - 01:57 PM
I used a piece of wood about .8x.8x3 inches that I inserted in the front handles, then I screwed them into place. I then hotglued the front and back handles of each gun to the other guns handle. It stays together quite well, and ranges are the same as a modded blaster.
Questions, comments, flames?
#2
Posted 14 March 2009 - 02:05 PM
#3
Posted 14 March 2009 - 02:14 PM
#6
Posted 14 March 2009 - 02:37 PM
#7
Posted 14 March 2009 - 05:11 PM
added that hilarious quote to my signature, while playing with my butthole, dude.Cool, but they don't look straight compared to each other, so do you angle each one when you shoot it?
Sick gun. I can honestly say I've never thought of combining two DTGs. Somewhat creative.
Please to be having a bigger picture?
(I forgot to take a picture of my own poppers)
Every size rod you could ever want.
#10
Posted 14 March 2009 - 06:25 PM
Whatever, maybe you can shoot down all those arguments in an instant. It's just not soemthing I'd use.
Good work anyways. Nice paintjob and fairly clean. I'll applaud you on that.
Edited by Glint, 14 March 2009 - 06:25 PM.
This has spiraled beyond uselessness into utterly stupidy.
Read it again until you figure it out.
#11
Posted 14 March 2009 - 06:48 PM
It is a bit heavy, that's true. Not that bad, though. It's about the same size as a magstrike, so it's not very big. As for priming it, it isn't hard at all, and can be easily done. Only about two seconds.Personally, I don't really see the point. It'll be awkward to carry around (not to mention heavy, especially front heavy if you haven't put weights in the handle), awkward to prime, fairly big and hunky and and reasonably, annoyingly long reload time (not putting darts in, but priming both blasters).
Whatever, maybe you can shoot down all those arguments in an instant. It's just not soemthing I'd use.
Good work anyways. Nice paintjob and fairly clean. I'll applaud you on that.
#12
Posted 14 March 2009 - 07:37 PM
#13
Posted 14 March 2009 - 07:43 PM
I would suggest attaching a strap to both the priming mechs, and looping that around your shoulder. Then you just push the guns forward to cock both at once.On this one you just cock both. I hadn't thought of adding a string, but that would make it easier to use.
#15
Posted 14 March 2009 - 09:58 PM
Christmas was coming up, so my friend and I decided to throw something together for one of our friends. My friend had just put together a dual nightfinder, and I pulled two blasters out, looked at them for a bit, marked up where to cut, and basically made the same thing with blasters. Then we gave it a paintjob. We called it the guardian.
I used a piece of wood about .8x.8x3 inches that I inserted in the front handles, then I screwed them into place. I then hotglued the front and back handles of each gun to the other guns handle. It stays together quite well, and ranges are the same as a modded blaster.
Questions, comments, flames?
Christmas, when? 9 months! Did you mean something else?
#16
Posted 14 March 2009 - 10:04 PM
No, he said "Christmas was coming up." he posted after 08 X-mas I'm guessing.Christmas was coming up, so my friend and I decided to throw something together for one of our friends. My friend had just put together a dual nightfinder, and I pulled two blasters out, looked at them for a bit, marked up where to cut, and basically made the same thing with blasters. Then we gave it a paintjob. We called it the guardian.
I used a piece of wood about .8x.8x3 inches that I inserted in the front handles, then I screwed them into place. I then hotglued the front and back handles of each gun to the other guns handle. It stays together quite well, and ranges are the same as a modded blaster.
Questions, comments, flames?
Christmas, when? 9 months! Did you mean something else?
Edited by Disturbed, 14 March 2009 - 10:05 PM.
#18
Posted 15 March 2009 - 06:40 PM
#19
Posted 15 March 2009 - 07:28 PM
A double NF however it almost the exact same size (top to bottom) as a reg. NF, so that's not that big of a difference.
I'm amazing at Forza3! I destroyed the engine of a 2mil C car by downshifting! YAY!
I hate you. And all noobs who are like "OMFG i r liek, glued sh1t 2 shit. jak offf ma ego. NAOW!"
#20
Posted 15 March 2009 - 07:47 PM
-nerfbros
#21
Posted 16 March 2009 - 02:02 AM
Christmas was coming up, so my friend and I decided to throw something together for one of our friends. My friend had just put together a dual nightfinder, and I pulled two blasters out, looked at them for a bit, marked up where to cut, and basically made the same thing with blasters. Then we gave it a paintjob. We called it the guardian.
I used a piece of wood about .8x.8x3 inches that I inserted in the front handles, then I screwed them into place. I then hotglued the front and back handles of each gun to the other guns handle. It stays together quite well, and ranges are the same as a modded blaster.
Questions, comments, flames?
Christmas, when? 9 months! Did you mean something else?
Is it really that hard to think about? He made this gun a couple months ago, probably November-ish. He just got validated, so now he posted it. Pretty simple...
Back on topic:
I think trying to operate and fire both guns at the same time on this would be awkward and would kill your ROF. If I made one of these, I'd have both loaded, and just use the top one, with full ROF and comfortability intact. Then when you run out of ammo on the top one, flip the gun over and repeat. It's essentially a 20-shot DTG that way.
Come to think of it, I might have to do this now...
Probably dead by now, or something.
#22
Posted 16 March 2009 - 10:06 AM
If I made one of these, I'd have both loaded, and just use the top one, with full ROF and comfortability intact. Then when you run out of ammo on the top one, flip the gun over and repeat.
I would do almost the same thing - except I'd keep the one on the bottom primed for an emergency second shot. Playing indoors, it can get quite frantic at times, and the ability to tilt the gun up slightly and pop off another shot while you're cocking the top gun would be quite a valuable asset.
Once you've fired the bottom gun, you would just wait for an opportune moment to cock it again.
Edited by Ambience 327, 16 March 2009 - 10:07 AM.
The fourth exciting Nerf War in Fort Wayne, IN.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users