#1
Posted 05 March 2009 - 11:29 PM
Ideas:
BBBB (seems a little on the expensive side, for multiple)
NFs (I'm not sure if they're good enough for an outdoor primary)
Homemades are ok with me.
#2
Posted 05 March 2009 - 11:44 PM
http://www.hasbrotoy...ID=13879&BR=582
From there, you can look into doing a spring replacement with an Ace Handyman spring, but if that is not available, a simple AR removal should get another 10-15 feet.
If you do a spring replacement, it would make sense to a barrel replacement. 1/2 inch PVC works perfectly with stock darts, and it costs 2 bucks for 10 feet.
Each gun would take about 20 min to fully mod, and all you need is a screwdriver and hot glue gun. A dremel or drill would help for AR removal, but not needed. Hope that helps!
-Deamonn
21:45 Gears That's boob grabbing time
21:45 Gears it is so easy
#3
Posted 05 March 2009 - 11:54 PM
The springs are about 4.00 per 2-pack at Home Depot
So it'll cost about 11.00 per blaster.
Do NFs get enough range to not make it totally one-sided when my friend and I have SNAPs/Titan/Hornet/BBB/DCHAP? Otherwise, it might make more sense to use BBBBs, because they're around 11.00 total as well.
#4
Posted 06 March 2009 - 12:02 AM
Edited by nerfnut23, 06 March 2009 - 12:19 AM.
#5
Posted 06 March 2009 - 12:08 AM
If the NF costs 6.00, and shipping is ~10.00 total
The springs are about 4.00 per 2-pack at Home Depot
So it'll cost about 11.00 per blaster.
Do NFs get enough range to not make it totally one-sided when my friend and I have SNAPs/Titan/Hornet/BBB/DCHAP? Otherwise, it might make more sense to use BBBBs, because they're around 11.00 total as well.
A NF is a secondary. Give them a BBBB or 2 BBMMs.I say 2 because they are cheap and easy to mod, 1/2 the price of a BBBB, so 2 is good. It also is fun to dual-wield powerful Nerf cannons. Soon I will have my writeup for the BBMM from Hell. I need more epoxy putty. Or just make some SNAP Mk. 4s with PEX plunger rods. And yes, a Titan would not just make it 1-sided, at close range, it will be near-lethal. Like I said, use the BBMMs in pairs, and let the awesome foamfest begin!
#6
Posted 06 March 2009 - 01:49 AM
And I don't have access to +bow springs, so no snapbowmk4s. SNAP-5s are a possibility though.
#7
Posted 06 March 2009 - 02:06 AM
On topic: SNAPs would actually be a good choice, if you have the chops/time to build 'em. SNAPbows are really too overpowered for use with stock darts. You could always try a weaker spring. The time investment for a simple homemade is comparable for that of a fairly complex modification. If you're playing in fairly close quarters, I would advize against BBBBs, as they really are pretty overpowered. LBBs are much weaker, and cost pretty much the same amount.
BBMM=Buzz Bee Mega Missile.
Edited by rork, 06 March 2009 - 02:07 AM.
<a href="http://nerfhaven.com...howtopic=20409" target="_blank">Make it pump-action</a>
#8
Posted 06 March 2009 - 10:26 AM
They are great loaner guns, I've used them to supply a few of my wars with my friends.
Skitzo-
#9
Posted 06 March 2009 - 10:27 AM
From what I can see, its between the BBBB and the SNAPs. I'll probably go for the 4B, because I don't have the time to make another four-five snaps.
#10
Posted 06 March 2009 - 11:15 AM
#11
Posted 06 March 2009 - 11:23 AM
Best to go with the BBBB or BBMM. They are cheap as in most bang for your buck. It will allow those people to be competitive against the modded ones others will bring. And will be more fun overall. Don't plug the pumps tho. Cept maybe for the BBMM cause they have such a short throw the extra air helps speed up the pumping. BBMM are only around 6-7 bucks too and are way faster to mod then a NF. And much more range.
Use the BBMM, all you need to mod it is a saw! And without a better barrel in, it can shoot megas. My BBMM outranges my BBBB by about 50' flat, but I added a new pump and a brass barrel.
#12
Posted 06 March 2009 - 01:51 PM
What makes you think that? I didn't notice any difference in power between my BBBB and LBB.LBBs are much weaker, and cost pretty much the same amount.
Edited by Daniel Beaver, 06 March 2009 - 01:54 PM.
#13
Posted 06 March 2009 - 02:22 PM
They are made poorly compared to either of the alternatives. All three BBBB BBMM and the SGSL are made with a metal trigger pin this means they call all take more pressure to the trigger before that is a fail point. On the LBB you are more likely to snap your trigger pin if you have too much pressure in the tank.What makes you think that? I didn't notice any difference in power between my BBBB and LBB.LBBs are much weaker, and cost pretty much the same amount.
#14
Posted 06 March 2009 - 08:55 PM
#15
Posted 06 March 2009 - 10:13 PM
And I was talking to Nerfnut about the need to differentiate between SNAPbows/SNAPs.
<a href="http://nerfhaven.com...howtopic=20409" target="_blank">Make it pump-action</a>
#16
Posted 06 March 2009 - 10:23 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users