5 replies to this topic

[CustomSnake202]

I took apart my rf20 and I took out the pegs. When i was trying to put it back together, I couldn't get my darts to fire. I noticed the small black air-switch (not sure the name of it, but it has two holes at the end to switch the airflow) and tried to line it up with the barrels. It still didn't work. All of my internals are fine, nothing is broken. I can get the air to come out and rotate the barrels but I think it's just blowing of the back of the plastic. Is there a certain way to put this peice back in place so the air flows nicely into the barrels? Any pics that might help? Also I read the previous thread about taking out the pegs on a rf20 and it didn't help.

[THIRST]

Well, when you mod the rf20, you cant fire stock darts anymore. Make sure the black piece is in the right position if thats not the problem. The black piece is in so it has 1 hole over another, lining up to the turret.

THIRST

[Nazgul Lord]

It wont fire stocks unless u drill out the pegs and the x's but leave the circle that holds them

[Chrysophylax]

Custom, I had the goddamn same problem. Man, waste of a gun, I can't figure out what to do. Shoot me a PM if you figure it out.

[CustomSnake202]

Custom, I had the goddamn same problem. Man, waste of a gun, I can't figure out what to do. Shoot me a PM if you figure it out.

Well, thanks to THIRST and Nazgul_Lord, mine works fine. I thought without the holes, i could shoot stock darts too. But I was wrong. After all the modding, I wasn't very satisfied with my stefan range so I decided to leave in the poles. I'm just gonna use my rf20 to mess around. My twin powerclips will get all the action in a nerf war.

[Ranger]

Did you poke the back of the barrel accidentely maybe? Becuase you can't really see when that happens.