2 replies to this topic

[Gamefreak]

I modded my NF about a month or 2 ago and I was going to post how I did it. But I never did so yeah here I go.

First open it up. 2nd take the old barrel and cut it at the last edge. Than shove a 1 inch 17/32 piece of brass in there. Next put a 4 inch piece of 9/16 brass on it. Gule it all together then close it up and your done a quick and easy way to mod your NF. Confused? Ask and I'll post pics. Enjoi, Gamefreak.

Edited by Gamefreak, 14 February 2004 - 01:38 PM.

[Half Newb Half Nerfer]

Post pics.

[THIRST]

Its not "new". I did that a long ago. I got less range on that mod, so I switched it up with a better nested brass mod, and now Im getting alot better range, accuracy, and velocity...Trust me, pitch that mod because it really blows.

The mod you should do is:

Drll out the circular air restrictor on the pump tube cap. Glue the cap to the other cap, and glue that to the plunger tube. take your barrel and glue it into the cap that origionally held the barrel post. Put it all together, and you have a much better gun.

THIRST