14 replies to this topic

[Watari]

Materials Needed

-Screwdriver for Magstrike Shell
-Different size screwdriver for bladder screws
-Hacksaw
-Wildfire bladder
-Wildfire Plastic case thing

Step 1:
Cut the shell like so


Step 2:
Remove the old bladder


Step 3:
Add the Wildfire bladder with protective case thing


Step 4:
Screw the Bladder screws in


Step 5:
Put it back together

[1337]

how many shots does it hold?
how many pumps does it take to acheive full capacity?
does it affect range?

[Blue]

I've always wondered this: If you took the plug from Forsaken Angel's magstrike mod and put that in the back instead of the OPRV, could you attach the original bladder also? So you'd have an insanely huge bladder, and hopefully the ability to shoot a bunch of clips, making priming almost nothing if you can just stand somewhere pumping the gun for a while, then go try to get people? Or would that weaken the force of the rubber somehow, so that the air drizzles out?

[foxdemon82]

What is that plastic casing around that bladder?

[Watari]

how many shots does it hold?
how many pumps does it take to acheive full capacity?
does it affect range?

Well, i'm not going to pump it more than 40, but it should hold more then that because a Magstrike Bladder holds around 40, but I guess I weakened it. EDIT: No, it doesn't affect the ranges and I can pull off 2 clips with ~30 pumps...

I've always wondered this: If you took the plug from Forsaken Angel's magstrike mod and put that in the back instead of the OPRV, could you attach the original bladder also? So you'd have an insanely huge bladder, and hopefully the ability to shoot a bunch of clips, making priming almost nothing if you can just stand somewhere pumping the gun for a while, then go try to get people? Or would that weaken the force of the rubber somehow, so that the air drizzles out?

You could probably attach that plug, but it's really hard to hold a bladder together without screws because even his plug failed and he said your best chance is to sand down the OPRV.

What is that plastic casing around that bladder?

Wildfire casing, I used it so that the bladder would be sticking out.

Edited by Watari, 22 February 2009 - 05:17 PM.

[Blue]

What is that plastic casing around that bladder?

It protects the bladder somewhat. Same as the white thing in the Magstrike, just older.

[nerfnerd88]

ll
V

Edited by nerfnerd88, 22 February 2009 - 06:16 PM.

[nerfnerd88]

Very nice job. With a wildfire bladder and nothing behind it to kick in the OPR, when the bladder reaches the end of the casing you should be able to fire off 3 mags easily.

Although for some strange reason it seems all wildfires plastic casings around bladder are dirty.
PS. I like the powerclip mag

Edited by nerfnerd88, 22 February 2009 - 06:13 PM.

[Banshee]

Haha, sorry but your Magstrike looks SO much like a DeWALT power tool!!!

[Banshee]

Edit: stupid page error.

Edited by Banshee, 22 February 2009 - 06:13 PM.

[cheesypiza001]

Haha, sorry but your Magstrike looks SO much like a DeWALT power tool!!!

I completely agree.

[SchizophrenicMC]

Haha, sorry but your Magstrike looks SO much like a DeWALT power tool!!!

I completely agree.

It's uncanny!

[Watari]

Hehe, I wasn't really planning on it to look like a DeWALT, I just like the yellow/black color scheme.

[Soothsayer]

Hehe, I wasn't really planning on it to look like a DeWALT, I just like the yellow/black color scheme.

Just in case you don't know, I believe target sells exclusive black and yellow magstrikes for 20 bucks.

http://ecx.images-am...KFL._SS400_.jpg

Edited by Soothsayer, 23 February 2009 - 11:55 PM.

[umpshaplapa]

Hehe, I wasn't really planning on it to look like a DeWALT, I just like the yellow/black color scheme.

Just in case you don't know, I believe target sells exclusive black and yellow magstrikes for 20 bucks.

http://ecx.images-am...KFL._SS400_.jpg

And here I was, thinking that he had a yellow mag strike that he just beat the shit out of.