#1
Posted 20 February 2009 - 06:58 PM
#2
Posted 20 February 2009 - 07:24 PM
Can someone give me a link to a roto rocket mod. I have searched but can seem to find any. I want to single it so if anyone could help it would help. I also want to make it so i can shoot it flat.
Don't micro dart single it. You'll injure someone. As for horizontal use, remove the covers and take out the little oval piece under the trigger. You are going to need a triangle screw driver to remove the covers. I made my own. As for barrel mods, I am using a 3/4" PVC compression coupling. It has a rubber ring that compresses down around the barrel when the flange is tightened. On the other end is a 3/4" MIP fitting. I wish I could find one that was a female end, but it works out fine for the ball adapter.
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?
#3
Posted 20 February 2009 - 07:35 PM
#4
Posted 20 February 2009 - 08:08 PM
Pics could help some. Not trying to be a jerk.
Oh jeeze... Put in a little effort here, kid. This is probably THE easiest blaster to modify, precisely because there is very little to do. Put a barrel on the end, and take the stupid limiter out. Done. There are no complex inner workings you need pictures for.
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?
#5
Posted 20 February 2009 - 10:17 PM
#6
Posted 20 February 2009 - 10:26 PM
This guy can see the future!
hasbro in a nerf war!!!!! dude the will cancel it and confinscate are guns
#7
Posted 20 February 2009 - 10:33 PM
Edited by lambchop, 20 February 2009 - 10:34 PM.
#8
Posted 20 February 2009 - 10:55 PM
#9
Posted 20 February 2009 - 11:01 PM
Maybe one of those 1/2" CPVC couplers would work. You know, the couplers made specifically for 1/2" CPVC, and are usually sold right next to the CPVC itself?
Yes but would the cpvc coupler fit around the barrel?
#10
Posted 20 February 2009 - 11:10 PM
A shotgun attachment would be wise, if you ever intend to shoot this at someone. You'll probably never be able to use it at a war, but among friends it would probably slide. You should only ever use the singled barrel for seeing how many cans you can shoot through, if the dart even survives.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users