#1
Posted 18 February 2009 - 04:49 PM
Stock, it shoots rockets about 20 feet.
Here we are going to convert it to shoot stefans.
The materials you will need.
Use the length of PETG that suits you best; I used 8".
Start wrapping E-tape around the bottom of the PETG until it is tight in the Salvo barrel.
Once it is tight, wrap E-tape again about 1.5-2 inches up the PETG until it is flush with the Salvo barrel also.
Place it inside the Salvo.
Rinse, wash, repeat.
There you go, depending on your dart fit, you should get ranges around 80'-100'
Questions, Comments, Flames?
<3
#3
Posted 18 February 2009 - 05:02 PM
There you go, depending on your dart fit, you should get ranges around 80'-100'
How many pumps does it take to get that kind of range? Also, how many pumps would it take, and what would the ranges be like if the pump were plugged? Lastly, very nice and clean job.
#4
Posted 18 February 2009 - 05:08 PM
Does that have any air loss? Or would it be better without the stock barrel, and just the PETG.
The BS works like the Hornet, so completely removing the barrels would be hard to do.
But no, there isn't any air loss.
There you go, depending on your dart fit, you should get ranges around 80'-100'
How many pumps does it take to get that kind of range? Also, how many pumps would it take, and what would the ranges be like if the pump were plugged? Lastly, very nice and clean job.
The OPRV kicks in around 12 pumps.
Plugged, you could expect around 100'-120'.
<3
#6
Posted 19 February 2009 - 12:37 AM
By the way, why are you modding in your car?
-Kaiba with mustache
http://www.escapistm...t-4-Dumb-Part-8
#7
Posted 19 February 2009 - 10:56 AM
Actually, its a 2001 Chevy Avalanche, but yeah.By the way, why are you modding in your car?
I needed to do a barrel change before one of our wars, and figured I'd take pictures.
The conversation went something like this...
"Oh dude, my stefans don't fit in these Shit barrels... "
"Wait, I have some PETG and some e-tape in the truck lemme get that."
"Yo man, got your camera? I could totally post this as a mod online or something!"
props to berfnerf.
Edited by sputnik, 19 February 2009 - 10:56 AM.
<3
#9
Posted 19 February 2009 - 04:12 PM
Would that work with cpvc? I gots to try that.
Depending on your particular Big Salvo, you won't even need to use E-Tape for CPVC.
#10
Posted 19 February 2009 - 05:05 PM
CPVC'd Big Salvo's work amazingly well with stock darts.Would that work with cpvc? I gots to try that.
<3
#11
Posted 19 February 2009 - 05:24 PM
Would that work with cpvc? I gots to try that.
Depending on your particular Big Salvo, you won't even need to use E-Tape for CPVC.
However, you may also crack the original barrels if you shove the CPVC in too hard. My first BS accepted CPVC stubs nicely, while the second broke.
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?
#13
Posted 19 February 2009 - 06:31 PM
Edited by RedHead, 19 February 2009 - 06:31 PM.
-Kaiba with mustache
http://www.escapistm...t-4-Dumb-Part-8
#14
Posted 19 February 2009 - 07:28 PM
Hey...I got a crazy idea: how about you stop all that sigging stuff? It's not even my thread and it annoys me.
#15
Posted 19 February 2009 - 07:31 PM
Muker
92% of teens would cry if Miley Cyrus was about to jump off a building.
If you are part of the 8% who would say "Jump B****, JUMP!!!!" . . .
Copy and paste this in your signature.
#16
Posted 19 February 2009 - 07:43 PM
LOL where you doing this is a car.
That has already been established.
Actually, its a 2001 Chevy Avalanche, but yeah.By the way, why are you modding in your car?
I needed to do a barrel change before one of our wars, and figured I'd take pictures.
The conversation went something like this...
"Oh dude, my stefans don't fit in these Shit barrels... "
"Wait, I have some PETG and some e-tape in the truck lemme get that."
"Yo man, got your camera? I could totally post this as a mod online or something!"
props to berfnerf.
Edited by cheesypiza001, 19 February 2009 - 07:44 PM.
#17
Posted 19 February 2009 - 11:33 PM
I can, but usually I don't.Nice, quick, perfect for my Salvo. Can you remove the barrels and rear load? Considering you didn't mention glue at any point.
It takes less time to ramrod them in.
LOL where you doing this is a car.
Actually, its a 2001 Chevy Avalanche, but yeah.By the way, why are you modding in your car?
I needed to do a barrel change before one of our wars, and figured I'd take pictures.
The conversation went something like this...
"Oh dude, my stefans don't fit in these Shit barrels... "
"Wait, I have some PETG and some e-tape in the truck lemme get that."
"Yo man, got your camera? I could totally post this as a mod online or something!"
props to berfnerf.
Answered.
<3
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users