10 replies to this topic

[needak]

This is my first write-up, so be nicer than you are to other people

I'm at school so I can't do pics, but i'll add them as soon as i get home.

you will need:
1. tp tubes
2. cpvc (1/2")
3. hot glue
4. 1 1/4" pvc
5. packing tape

insert 5 lengths of 1/2" cpvc into the tp tube and hot glue the spaces shut
cover the tp tube with packing tape and insert it over the 1 1/4" pvc
put the pvc end onto a 1 1/4 inch coupler and you're done

will post special ammo later

[Echnalaid]

Where's the air supply? I can't figure that out.

[Glint]

I think i read this about five times over before I came to the conclusion that this thing's basically a bunch of different tubes taped/glued/adhesived together in some way or another.

First off (as Echnalaid said) where's the air supply? Trigger Mechanism? Catch? Anything that actually makes it a freaking gun?

And secound off, don't post this "if you're at school and can't post pictures" Wait until you freaking get home to post this and actually make a good, clean thourough post out of it (as much as you can, seeing as this thing's just a bunch of pipes)

[The Nerf Devil]

Glint, on Feb 10 2009, 04:24 PM, said:

First off (as Echnalaid said) where's the air supply? Trigger Mechanism? Catch? Anything that actually makes it a freaking gun?

I think it is supposed to be a shotgun attachment.

needak, on Feb 10 2009, 03:55 PM, said:

insert 5 lengths of 1/2" cpvc into the tp tube and hot glue the spaces shut
cover the tp tube with packing tape and insert it over the 1 1/4" pvc
put the pvc end onto a 1 1/4 inch coupler and you're done

How do you cover the tp tube with packing tape and insert it over the 1 1/4" pvc?

[slowguitarman]

Telling us to be nice isn't a good idea. Is there any point to what you have posted?

[Glint]

The_Nerf_Devil, on Feb 10 2009, 01:30 PM, said:

Glint, on Feb 10 2009, 04:24 PM, said:

First off (as Echnalaid said) where's the air supply? Trigger Mechanism? Catch? Anything that actually makes it a freaking gun?

I think it is supposed to be a shotgun attachment.

Ah, if that is the case then I appologize for being a bit harsh.
But at least he could have specified that, instead of calling it a "Working Shotgun".

[Echnalaid]

Maybe it's because there's no pictures that we're confused.

[needak]

sorry, it's a shotgun ATTATCHMENT.

anyway, the ammo is made like this:

take 2 1/4'' peices of 1/2'' FBR and stick a washer between them with hot glue, you can fit about 3 of them in each barrel

[futureseal]

OK, now I get it. It's like that Absolver mod, but with a TP tube instead of a male/female adapter setup. Nice work I guess.

[Ambience 327]

I sure hope you're using a washer with a smaller diameter than the 1/2" FBR you're using, otherwise these things have the potential to cause an inordinate amount of pain and possible injury. Since your weight is right in the middle of something that is basically a 1/2" long x 1/2" diameter cylinder of foam, it isn't going to always fly "head forward" like a front-weighted nerf dart or stefan. These will have a tendancy to spin in midair, end-over-end, which means you might be hitting bare skin with metal if your washer is flush with the foam (or even slightly smaller).

I think a better idea would be to use standard bb weights in these, as they would be less likely to stick out of the foam.

That said, your 2 x 1/4" FBR shotgun ammo has given me food for thought. The fact that these will likely spin like that would most likely reduce their range (I'm not going to give a science lesson here, but the drag would be increased, slowing the dart down sooner rather than later). However, it would also lead to them being more likely to spread out in a true "buckshot" style, especially if you weighted each mini-dart slightly off-center of the cylinder's center line. Since I play indoors, range isn't much of a factor, and I've been trying to come up with a decent scatter blast for clearing narrow hallways, which this might just help with.

Edited by Ambience 327, 11 February 2009 - 11:30 AM.

[needak]

I cant get my camera to work, so no pics yet

Edited by needak, 11 February 2009 - 05:36 PM.