sorry my camera is reversed but heres the initials for struck by stefan:
now for the write up:
items/tools needed:
1:pipe cutters
2:sludge hammer
3:copper tubing you can hammer flat
4:duct tape (what color you use depends on what you want it to look like color wise)
5:hot glue gun and lots of hot glue sticks
6:foam mats (you can get them at sports stores)
7:scissors
Step 1: Draw out your blade (I decided to go for a leaf bladed type thing)
Step 2: Cut it out (I had to trim it before I was happy with it
Step 3: Draw out you hilt
Step 4: Cut it out =)
step 5: Firmly hot glue them together (I lost the pic but you should be able to figure it out if you are not a fish)
Step 6: Lay out your copper tubing and cut it to size. mine was just the right size with no cutting =). but cut it with the pipe cutters if you need to. do that twice
Step 7: flatten the copper with the sludge hammer. do this twice
step 8: VERY firmly hot glue the brass to the blade and hilt
step 9: wrap the entire thing in duck tape and decorate it with duck tape and cardboard.
your done! now you can rush peeps with pride!
qs?
cs?
fs?
