6 replies to this topic

[UpGraD3]

I went to a hardware store today and I took a micro stefan with me. I wanted some brass, pvc, or cpvc to mod my At2k. When I got there the only one my dart would fit in was 1/2 CPVC. So I modded my At2k with that and I have to twist the darts to fit in. Sometimes when I shoot it, my darts flutter out. And they don't in any other gun? Does any one know if this is the right size? If so, whats the right size?

[Spectre2689]

Is your AT2k single-barreled? If so, I've heard a couple of things like that. For single-barreled 2k's to work properly, you have to have a reasonably long barrel, and the dart needs to go to the bottom. If it's just the top of the barrel that your dart's getting caught on when you put it in, ream the edge. The dart should be going all the way, or pretty close to, the bottom.

[UpGraD3]

No, It's multi barrel, all four.

[NinjaBob]

How are your darts made? (weight, length, ect.)

[UpGraD3]

I have 2 inch stefan micros made out of 1/2 foam backer rod. There 2 inches long and there are 2 bb's in them. But I actually think its because I was firing bad darts, with beads in the front (my first stefans, didnt have any bb's). That might be why.

[NinjaBob]

Yeah, if your darts are to light then they'll flip flop out of your barrel.

[Jappo]

If they fit to tight you may want to try streching a few. It may improve/fix your problem.