9 replies to this topic

[Mas Ketchup]

I know my last write up was terrible so im going to try to make this one better. I also have a better camera so the pictures should be better

Anyways, I went to walmart and picked up the last BBB.
I have been waiting so long and I finally got it. I was searching the Modification list for a couple mod, but I couldn't find one. So I decided to make my own.

Materials:
-BBB
-screwdriver
-hacksaw
-3/4in to 1/2in cpvc coupler
-1/2 cpvc
-drill ( if you want to drill through the white piece )

Lets get started.
Here are some pics before i opened it.
Front:


Back:


1st open the gun up. ( duhh.... ) It should look something like this.


Find these two pieces. You do not need the one on the left.


But the right on the other hand you have to have. This is where the drill comes in. If you want to drill through you may, but i didn't. I was just too lazy to, but if I go to a nerf war I will drill through it.


Now take the head and cut till it looks something like this.


Finally take you 3/4 to 1/2 cpvc coupler and and glue it on like so.



Screw it back together and it should look something like this.



This mod is pretty easy and it gets great ranges.
Mine only has a stock spring and its hitting about 70 feet average.

[Red Star]

Heh, Looks almost Identical to mine. Love it. Awesome. Good work.

[rokor]

Interesting. Was it really neccessary to open the gun in order to cut off a peice of the barrel? I've never seen those 3/4-1/2 before, but I guess I'll look around for a few.

[Merzlin]

I suggest doing more internel mods if you want better ranges. This is basically Angel's mod on the BBB but not as much

[Echnalaid]

Good write-up. Doesn't the coupler spin around? It happens to mine, 'till I super glued it.

Off Topic- I want a red BBB, I saw one at TRU today, but instead I walked away with something else... Write-up for that soon...

[Mas Ketchup]

Your right I didn't have to open the gun up to saw off the head, but I did have to open it so I could remove the ARs.


My BBB head does not spin, but maybe its because its the new one.

Edited by Mas Ketchup, 31 January 2009 - 10:36 PM.

[Red Star]

Quick Question. Comparing mine to yours..... Are those caps and ends actually Pink/Red?
Or Is that just your camera?

[Mas Ketchup]

Quick Question. Comparing mine to yours..... Are those caps and ends actually Pink/Red?
Or Is that just your camera?

ya it is

[TheNerfLoki]

What I did to coupler my bbb with 0 dead space was to cut a large hole in the front most internal piece, attach it to the plunger, make a marking where the plunger head stops, then lastly glue half a coupler in at the front of the mark. But your way works too.

[Draconis]

Quick Question. Comparing mine to yours..... Are those caps and ends actually Pink/Red?
Or Is that just your camera?

Just poor White Balance adjustment on the camera.