So what you'll need:
1/2 CPVC about 5-6 inches
3/4 CPVC about 4-5 inches
1/2 - 3-4 Coupler
Alright so here's the project:
What you'll need to do is get about 5 inches of 3/4 inch Cpvc,
Create a Box such like this: about 1/2 inch above the bottom of the pipe.
Cut that out with a Dremel/Hacksaw
Add that 1/2-3/4 Coupler to the bottom of the pipe you just cut like this:
Now take your other pipe and whatever length you cut your 3/4 pipe at add 1 inch to it and cut like so
Add E-tape in Different places to create Tight seals.( This is not needed, You only Need a layer at the bottom to create a seal.) Like so:
Throw that onto your BBB you just modded or any other 1/2 CPVC'd modded gun and you will be ready to Nerf another day!
Post any questions that you have!
Edited by Red Star, 01 February 2009 - 02:08 PM.