The Hellbringer
#1
Posted 30 January 2009 - 06:00 PM
So leave your comments and feedback!
I ended up with a reactor with some balls for 25 cents. I mainly wanted the balls...
#2
Posted 30 January 2009 - 06:03 PM
#4
Posted 30 January 2009 - 06:12 PM
#5
Posted 30 January 2009 - 06:19 PM
How does a sideways peg make it shoot further/harder then no peg? Nice paint job though.
If you're talking about the one down in the barrel, it's to stop the stephan from getting sucked into the plunger tube.
#6
Posted 30 January 2009 - 06:19 PM
there isnt a peg anymore and because when u make a hole in the a.r its small and not that much airflow but if you turn it sideways it gives it air from both sides and nothing but a small area blocking it. So basically this way u get more air and range to the dart than from drilling a little whole.How does a sideways peg make it shoot further/harder then no peg? Nice paint job though.
I ended up with a reactor with some balls for 25 cents. I mainly wanted the balls...
#7
Posted 30 January 2009 - 06:24 PM
there isnt a peg anymore and because when u make a hole in the a.r its small and not that much airflow but if you turn it sideways it gives it air from both sides and nothing but a small area blocking it. So basically this way u get more air and range to the dart than from drilling a little whole.How does a sideways peg make it shoot further/harder then no peg? Nice paint job though.
Still there is more area blocking airflow than if you completely drilled it out like in this writeup.
#8
Posted 30 January 2009 - 06:35 PM
#9
Posted 30 January 2009 - 07:09 PM
#10
Posted 30 January 2009 - 07:15 PM
if i take it out the dart will get sucked into the plungerThere's no point in leaving it sideways, as you're never going to vacuum load with a Recon, just take it out.
Edited by troy2421, 30 January 2009 - 07:24 PM.
I ended up with a reactor with some balls for 25 cents. I mainly wanted the balls...
#11
Posted 30 January 2009 - 07:23 PM
Yep, it's happened to me. I just shot some glue into the hole on the side of the barrel.if i take it out the dart with get sucked into the plungerThere's no point in leaving it sideways, as you're never going to vacuum load with a Recon, just take it out.
#12
Posted 30 January 2009 - 07:25 PM
yep me too.Yep, it's happened to me. I just shot some glue into the hole on the side of the barrel.if i take it out the dart with get sucked into the plungerThere's no point in leaving it sideways, as you're never going to vacuum load with a Recon, just take it out.
I ended up with a reactor with some balls for 25 cents. I mainly wanted the balls...
#13
Posted 30 January 2009 - 07:47 PM
#15
Posted 30 January 2009 - 07:59 PM
you obviously can't readIS THAT JUST A PAINT JOB! Where oh where is the world going today?
Yes he can, but the mod isn't anything everyone hasn't done before, so the only thing new is the paintjob.
Edited by The_Nerf_Devil, 30 January 2009 - 09:21 PM.
#16
Posted 30 January 2009 - 09:19 PM
And I think your scope's on backwards.
#17
Posted 30 January 2009 - 09:47 PM
*FA would be exempt, of course.
Edited by rork, 30 January 2009 - 09:48 PM.
<a href="http://nerfhaven.com...howtopic=20409" target="_blank">Make it pump-action</a>
#18
Posted 30 January 2009 - 10:06 PM
Yelling at this guy for posting this in his own thread will nto make your E-peen any larger.
Since you're too young to get a hotel, you should look around, maybe check some aim chatrooms.
Theres alot of really friendly, nice people out there, that'd be more than willing to accomodate a young boy.
#19
Posted 30 January 2009 - 10:54 PM
Is it just me (it may in fact be) or does it look as if the reverse part of the plunger-tube ("ARMED") is not where it should be?
#20
Posted 30 January 2009 - 11:02 PM
On a side note, use proper grammar and punctuation, and say "you" instead of "u". If you don't want to post coherently, I can always point you out to an admin, and maybe they will take care of you.
SGM's Shred Shop -Mod Service
NerfHaven's resident drama queen.
#21
Posted 30 January 2009 - 11:21 PM
Talio.
#22
Posted 30 January 2009 - 11:37 PM
If a thread is useless or unnecessary, one post will suffice. And that one post would be from a moderator.
EDIT: I was typing my post before Talio posted...
Edited by AssassinNF, 30 January 2009 - 11:39 PM.
Probably dead by now, or something.
#23
Posted 31 January 2009 - 12:31 AM
Is it just me (it may in fact be) or does it look as if the reverse part of the plunger-tube ("ARMED") is not where it should be?
Thats the new version of the recon, the one with the plunger tube sleeve.
As for feedback, its an OK Paint job, but I'm pretty sure to get the most "power" out of an AR removal, is to just remove it.
Huh, Wonder where I got that?
FA_24's response to Ice's back pain thread:
I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users