7 replies to this topic

[Nerfer327]

This is the Cheapest Stefan Holder You Could Possibly Ever Make.

Remove the Jam Clearing Door from your LS, take you 1/2" drill Bit and drill a few holes. I put 8
After That i hit it with some Black Paint (for the hell of it) and now you got a really cheap stefan holder for making you little dart of fun

Have Fun

-Nerfer

[rokor]

Or you can do the same thing with card board... I use a MS clips because I don't use my MS, simple as that. But I must give you some props for finding a way to hold drying stefans without the use of a full dart body

[Nerfer327]

Thats What happens when i get bored.

[hereticorp]

Wood... Is there anything it can't do?

[Glint]

Just like rokor, I use my MS clips to dry stefans.

But I think what this could be used for isa ctually putting it onto a gun. The jam door's quite small and would probably fit well enough onto a gun (if the stefans are in fact tight enough not to fall out). I was just thinking that I could do this and maybe slap it onto my LS... havem't figured out where yet but hey! it's an idea.

[Shrub]

Well most stefans will fall out unless your using BS's or Hereticorp stefans then if they stay there t olong they will for circles in them due to pressure in that part of the dart from the dart holder.

[cheesypiza001]

You can get Tommy20 darts in packs of 100 I believe. In these packs, the darts are positioned upright with the help of a large piece of thin red cardboard with holes in it. The holes are obviously the same width as the darts. There are at least 25 dart holes on each board, maybe even more. I will try and get pictures soon.

[rork]

Nerfer327, on Jan 29 2009, 10:56 PM, said:

now you got a really cheap stefan holder for making you little dart of fun

Why grammr matters: you can end up sounding like a bad Chinese-to-English translation.

Edited by rork, 30 January 2009 - 05:34 PM.