5 replies to this topic

[123nerf]

I got my PAS a couple days ago and have it CPVC couplered, LS Spring Addition, and FBR Silencing. But the gun is very sensitive. Just one little tap to the gun or trigger fires it. It is so sensitive. But I did put some hot glue around the trigger and torsion spring. And sometimes the priming handle on the front of the gun suddenly shoots up when I cock it. Please help.

[twenty4]

Try adding a stronger trigger/catch spring.

[123nerf]

Try adding a stronger trigger/catch spring.

Question time
1. Where is the catch spring ?
2. What spring do you recommend ?

[twenty4]

The catch spring is under the trigger. I would try using a spare maverick spring or check Forsakenangel24's PAS level 2 mod. If you can't do that just take apart a BIC mechanical pencil and use that spring because it works pretty good.

[Darth Tom]

There's a section for strengthening the catch in FA24's PAS writeup. Give it a look.

http://nerfhaven.com...?showtopic=7783

Edited by Darth_Tom, 29 January 2009 - 07:37 PM.

[123nerf]

Thanks guys, I tried Angels way with the bigger torsion spring and the Bic pen spring.

Thanks so much, I got it to work.


123nerf