Jump to content


Photo

Defender T3 Writeup

Cpvc/Pvc coupler

4 replies to this topic

#1 BustaDartInYOurAss

BustaDartInYOurAss

    Member

  • Members
  • 148 posts
  • Location:Commack, Long Island NY

Posted 25 January 2009 - 02:16 PM

This is my first full blown wirtten writeup, so please hear me out.Also, if you have any questions I will answer them to the best of my abilities.

Materials Needed:

-DT3 Handgun
-Super Glue
-Epoxy Puddy
- Disk Shot spring ( optional)
- Cpvc and Pvc coupler
- Hot glue
- Small spring for catch (only needed if you add a spring)
-Dremel, with sanding bit

Ok, so heres a picture of its stock internals

Posted Image

And heres a close up on the stock barrel,which you can see was never connected to the plunger to begin with.

Posted Image

Ok here is where I took a Pvc coupler and shoved a Cpvc coupler into it, so it will has a double coupler. After that I super glued the barrel there then added Epoxy puddy as seen here.

Posted Image

I dont have a picture of it but while that was drying, I wrapped the plunger head in E-tape and also added a Disk Shot spring for extra power. So here it is put back together.

Posted Image

And here is a picture showing where you need to dremel.(there used to be two walls in the front so I just sanded those down untill 1/2 inch PVC fit in there.

Posted Image

And thats it for the Write up. Now for the Results

Sunday, January 25. 12pm, the tempature was 26 degress fahrenheit with a wind chill of 14 degrees fahrenheit. All these shots were taken with a flat angle on pavement at a height of 5'7", with a 5" long Cpvc barrel and one 10" bungee. Here are the results...

1: 93',0"

2: 88',6"

3: 79',10"

4: 80',11"

5: 74',5"

Conclusion:

Overall a good handgun for the minimal work required.
Difficulty out of ten: 4/10

Anyway...Questions, comments, flames?

Edited by BustaDartInYOurAss, 26 January 2009 - 10:25 AM.

  • 0

#2 Magic

Magic

    Formerly NerfOnFier

  • DO NOT TRADE
  • 540 posts
  • Location:Commack, New York

Posted 25 January 2009 - 04:19 PM

One word. FUCKING SICK. Actually that's two words. Whatever. On topic: The gun itself looks good, and for 93FT out of a battle pistol, it's worth it. Nice job.
  • 0

#3 FERD

FERD

    Member

  • Members
  • 27 posts

Posted 25 January 2009 - 06:35 PM

NoF that's 2 words ... but i agree with you looks sick
  • 0
Im not nice...................... I KICK BABIES

#4 mystefansdontflystraight

mystefansdontflystraight

    Member

  • Members
  • 1,176 posts
  • Location:Toronto, Canada

Posted 25 January 2009 - 08:02 PM

Awesome. That is one word. I should have NEVER given my DT3 pistol to chefdave for free... Anyway, I could never get more than 40ft out of it. I love the double coupler. I have one on my xbow and on my singled 2k. I alternate barrels a lot, dremmeled out CPVC fits my darts nicely for a springer, but PETG is perfect for an airgun.
  • 0
QUOTE(Blacksunshine @ Dec 24 2009, 02:15 PM) View Post

QUOTE(white moonlight @ Dec 23 2009, 01:29 PM) View Post

It's just screaming to be rearloading...

I seen a movie about that once.



#5 BustaDartInYOurAss

BustaDartInYOurAss

    Member

  • Members
  • 148 posts
  • Location:Commack, Long Island NY

Posted 25 January 2009 - 08:05 PM

MSDFS: Its funny you said that, the first day I couldent break 40 feet either, but I guess the e-tape lubed itself up over time because the next day I was hitting these ranges.

NOF + FERD: Thanks guys, I look foward to shooting both of you with this...
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users