Well, outside, the blaster didn't perform to well. Here are the ranges...
62'
67'
42'
57'
56'
63'
When I were to shoot, the dart would leave the barrel with much velocity, then about 10-15' into the flight path, it would curve straight up then curve straight down. I am not sure why this is happening, but I can guess it's because of the 9" barrel. When I first put it together , I used a 12" peice, but my hot glue gun was over heating so when I inserted the PETG into the faux barrel, it bent. I then stuck in a wooden dowel that has a tightish fit and left it in boilling water for a few minutes, but then I couldn't get it out. The only other peice I had was a 9" peice so I figured that should do... I was wrong.
Anyone else have any other theories as to what might be the problem? I am using a Recon/LS spring combo with two O-Rings.
As for me selling the breeches, I would like to know if they are comparable to the brass variation first, and once I get that solved, I will try to find the cheapest way of accomplishing this.
EDIT: Grammar mistakes...
EDIT2: Better pictures will be up as soon as I figure out the problem.
Edited by rokor, 22 January 2009 - 04:54 PM.